Poster Information

AWT IMAGE

- Poster display is 90 cm tall by 60 cm wide, which is known as "Portrait" format – see Poster Presentations Layout
- You should prepare the poster in English and use the Poster Template for more uniformity. 
- The title should be about 40 cm long in bold font.
- Limit the number of font types 
-The following sections should be included in your poster:

  •     Title, authors and their Institutions.
  •     Abstracts 
  •     Introduction
  •     Experimental
  •     Result and discussion
  •     Conclusion
  •     References
  •     Tables and figures

Notes:  
1. The poster must be placed in the allocated panel by the  own presenter on November 8, 2022.
2.  All posters will be presented within the seminar days 8-10 November.


Presented Posters 

 

A-10-2041-2 Various co-polymers of MBA-poly(N-vinyl-2-pyrrolidone) macromolecular coordination complex as a novel and recyclable Lewis acid catalyst: synthesis, characterization, and performance towards  well-know organic reaction Adhesives, Paints and Coatings
A-10-2052-1 The Effect of Crosslinker on Glass Transition Temperature and Crystallinity During Synthesis of Liquid Crystalline Elastomers Adhesives, Paints and Coatings
A-10-2062-1 Synthesis and Curing of Thermoset Bismaleimide Resin Based on Epon 828 Epoxy Resin Adhesives, Paints and Coatings
A-10-2029-1 Monitoring the Curing Process of Bismaleimide / Epoxy Blend by FT-IR Spectroscopy Adhesives, Paints and Coatings
A-10-2044-1 Synthesis and characterization of corrosion resistance and superhydrophobic fluorine-based coating via sol-gel process Adhesives, Paints and Coatings
A-10-2113-1 Emulsion Copolymerization of Acrylic Monomers to Prepare Pressure Sensitives Adhesive (PSA): Effect of Triethylamine (TEA) as an Adhesion Promoter on Mechanical Properties Adhesives, Paints and Coatings
A-10-2088-1 Investigation  Rate Constant of isocyanate blocking reaction as coupling agent Adhesives, Paints and Coatings
A-10-2036-2 Prediction of TDI-Based Polyaspartic Polyurea’s Abrasion Resistance Adhesives, Paints and Coatings
A-10-2141-1 Development of a two-part acrylic adhesive with high thermal resistance Adhesives, Paints and Coatings
A-10-2112-1 Synthesis of an Eco-friendly multifunctional fluorinated urethane-acrylate resin as a promising UV-cured coating for anticorrosive applications Adhesives, Paints and Coatings
A-10-2195-1 Investigation of  substitute extenders of titanium dioxide by Barium sulfate and Aluminum silicate in order to use in rezins coatings Adhesives, Paints and Coatings
A-10-2121-1 Effect of Graphite Oxide on Hydrophobicity of Epoxy Resin Coatings Adhesives, Paints and Coatings
A-10-2235-1 Hydrophobicity Achievement of  Polyurethane Coating Using  Nano-Silica and Teflon Powders Adhesives, Paints and Coatings
A-10-2205-2 Improving the anti-corrosion performance of hydroxyapatite-based coating in the presence of an organic modifier Adhesives, Paints and Coatings
A-10-2112-2 Preparation of self-healing and anticorrosive epoxy coatings loaded with various inhibitor doped PANI nanofibers Adhesives, Paints and Coatings
A-10-2357-1 The effect of graphene quantum dots on the stability of graphene-based conductive inks Adhesives, Paints and Coatings
A-10-2357-3 Preparation and Evaluation of Water-in-Soybean Oil Emulsions Adhesives, Paints and Coatings
A-10-2364-1 Synthesis of a novel bisphotochromic dye based on 1,3-Diazabicyclo[3.1.0]hex-3-ene Adhesives, Paints and Coatings
A-10-2367-1 Eco-friendly UV-cured AMPS doped polyaniline-urethane methacrylate coating as a corrosion protection coating Adhesives, Paints and Coatings
A-10-2094-2 Adhesion properties of a polyurethane-acrylic hybrid adhesive synthesized through modification of polyol with a silane coupling agent Adhesives, Paints and Coatings
A-10-2409-1 The effect of PVP Molecular weight and Synthesis Temperature on Silver Nanowire Morphology Adhesives, Paints and Coatings
A-10-2468-1 Synthesis of the uv curable anticounterfeiting ink based on waterbased urethane acrylate resin, modified with Rhodamin B Adhesives, Paints and Coatings
A-10-2498-1 Synthesis and evaluation of optical and adhesion properties of a fluorescent pressure-sensitive adhesive Adhesives, Paints and Coatings
A-10-2391-1 CO2 adsorption of PET fabric coated with graphene oxide Adhesives, Paints and Coatings
A-10-2519-1 Synthesis of water-based acrylic resin modified with epoxy resin to improve printability properties of coatings on PVC substrate Adhesives, Paints and Coatings
A-10-2532-1 Synthesis, characterization and properties of UV cured and UV resistant polyurethane acrylate nano-composite coatings, modified by ZnO-based nanoparticles and Tinuvin 292 Adhesives, Paints and Coatings
A-10-2548-1 Synthesis of three novel silane-based carboxylic acids for application in methacrylated epoxy-based oligomers and their ability in the UV curable hybrid coatings Adhesives, Paints and Coatings
A-10-2579-1 Studying the effect of changing the amino number of curing agent on the properties of antifouling coating of E-PVC reactors in Arvand petrochemical complex Adhesives, Paints and Coatings
A-10-2522-2 A Comparative study on adhesion properties of polyurethane hot-melt adhesives, including C5 and C9 hydrocarbon tackifiers Adhesives, Paints and Coatings
A-10-2601-1 Preparation of a Magneto-Responsive Acrylic Pressure-Sensitive Adhesive Adhesives, Paints and Coatings
A-10-2063-1 Investigation of the Effect of Mixing Time and Speed on the Glass Transition Temperature of Tire Tread Filled with Nanoparticles Elastomers and Compounding Technologies
A-10-2054-1 Preparation of Elastomeric Sound Absorber Flexible Thin sheets via Devulcanized Tire Wastes Elastomers and Compounding Technologies
A-10-2066-3 Graphene Oxide/Silicon Rubber/PLA as a Conductive Thermoplastic Vulcanizates Elastomers and Compounding Technologies
A-10-2228-3 Chemical and Mechanical Assessment of Peroxide Cured EPDM for Fuel Cell Gasket Application Elastomers and Compounding Technologies
A-10-2250-1 The Effect of Fumed Silica and ATH on the Vulcanization and Mechanical Properties of Silicone Rubber Elastomers and Compounding Technologies
A-10-2247-2 Effect of water infiltration rate on mechanical properties of heat-treated crumb rubber containing cementitious mortar Elastomers and Compounding Technologies
A-10-2298-1 Analyzing the Role of Interface in Creep Resistance of Natural Rubber-Silica Composites Elastomers and Compounding Technologies
A-10-2261-1 Influence of Molecular Microstructure of Solution-polymerized Styrene-butadiene Rubber Types on Vulcanization Kinetics Elastomers and Compounding Technologies
A-10-2316-1 Comparison the Effect of OPS vs. MWCNT on Mechanical and Ablation Behavior of EPDM Nanocomposites Elastomers and Compounding Technologies
A-10-2301-1 How Does Modification of interface by a Long Chain Silane Alter Gas Transport in NBR/Silica Composites? Elastomers and Compounding Technologies
A-10-2284-1 Effect of Reduced Graphene Oxide on Cure Kinetics of Polydimethylsiloxane Elastomers and Compounding Technologies
A-10-2301-2 Investigating the Impact of Bound Rubber on Cavitation Resistance of Silica-Reinforced NBR Composites Elastomers and Compounding Technologies
A-10-2315-1 Curing characteristics and mechanical properties of (styrene butadiene rubber /ethylene propylene diene monomer)blend in the presence of a hybride of  carbon black and nanocalay Elastomers and Compounding Technologies
A-10-2494-1 Effects of recycled nanosilica on the cure properties and wear resistance of the green tire Elastomers and Compounding Technologies
A-10-2185-1 Studying the microstructures of Hydroxyl-terminated polybutadiene and Hydrobrominated Hydroxyl-terminated polybutadiene using NMR analysis Elastomers and Compounding Technologies
A-10-2162-2 Elastomeric nanocomposite based on SR/ IIR/ Silica Nanoparticles(SiNP): Design, preparation and characterization Elastomers and Compounding Technologies
A-10-2496-1 Compatibility Study and Mechanical Properties of Nitrile rubber/Ethylene- Propylene-Diene Rubber Blends Elastomers and Compounding Technologies
A-10-2517-1 Self healable Diels-Alder Crosslinked Polyurethane Elastomers Based on Furane Modified Calix[4]arene Elastomers and Compounding Technologies
A-10-2578-2 Silicone Rubber Compounds as Sealant for Polymer Fuel Cells: A Study of Curing systems and Nanoparticle Properties Elastomers and Compounding Technologies
A-10-2274-1 The Effect of Chopped Carbon Fiber on Ablative Behaviour of EPDM Based Elastomeric Insulation Elastomers and Compounding Technologies
A-10-2487-1 The role of carbon black as the secondary filler in improving non-linear viscoelastice behavior of styrene-butadiene rubber compound filled with modified silica Elastomers and Compounding Technologies
A-10-2608-1 Effect of Secondary to Primary Accelerator Ratio on Curing, Mechanical and Ablation Behavior of Elastomeric Composite Based on EPDM Elastomers and Compounding Technologies
A-10-2724-1 Curing haracteristics and mechanical properties of NR/CR/SBS blends Elastomers and Compounding Technologies
A-10-2047-1 Investigating the properties of Teflon nanocoatings containing Zinc nanoparticles on the steel surface Fibers, Films and Polymeric Membranes
A-10-2126-1 TFC organic solvent nanofiltration membrane fabricated by a novel HDPE membrane support covered by manganese dioxide /Tannic acid-Fe (III) layers Fibers, Films and Polymeric Membranes
A-10-2137-1 Preparation of Polyvinyl pyrrolidone (PVP)/carboxymethyl starch (CMS) hydrogel for excellent absorption of wound secretions Fibers, Films and Polymeric Membranes
A-10-2125-3 Sulfonated Aromatic Polymers and Organically Modified Montmorillonite Nanocomposite Membranes for Fuel Cells Applications Fibers, Films and Polymeric Membranes
A-10-2115-1 Fabrication of electrospun polyvinylalcohol nanofiber containing Ferula assa-foetida gum extract and investigating its antibacterial properties Fibers, Films and Polymeric Membranes
A-10-2228-4 Polyelectrolyte Membrane Based on Chitosan Blend for Direct Methanol Fuel Cell Application Fibers, Films and Polymeric Membranes
A-10-2228-5 Investigating The Effect of Imidazole on Electrochemical Properties of Sulfonated Polystyrene Membrane for Direct Methanol Fuel Cell Application Fibers, Films and Polymeric Membranes
A-10-2249-1 Investigating the Effect of Silica Nanoparticles Modified by Dendrimer on Performance of Polycarbonate Thin Film Nanocomposite Membranes in Submerged Membrane Systems for Waste Water Treatment Fibers, Films and Polymeric Membranes
A-10-2249-2 Amino functionalized ZnO nanoparticles were incorporated to a polycarbonate/polyvinyl alcohol thin film membrane to improve water treatment Fibers, Films and Polymeric Membranes
A-10-2267-2 Study on the Effect of Processing Parameters and LLDPE Concentration on the Haze of LDPE/LLDPE Blown Films Fibers, Films and Polymeric Membranes
A-10-2276-2 Dye rejection by nanofiltration membrane based on polysulfone and  bohemite particles modified with lysine Fibers, Films and Polymeric Membranes
A-10-2276-3 Fabrication and modification of PVDF mixed matrix ultrafiltration membranes by PEG and PVP hydrophilic polymers Fibers, Films and Polymeric Membranes
A-10-2280-2 In situ green synthesis of copper nanoparticles on nylon with Safflower extract Fibers, Films and Polymeric Membranes
A-10-2216-1 Fabrication and Characterization of High Modulus Composites as End Plate for Polymer Electrolyte Membrane Fuel Cell Application Fibers, Films and Polymeric Membranes
A-10-2068-2 Electrospinning of polymer solutions containing silica-poly (caprolactone) Fibers, Films and Polymeric Membranes
A-10-2456-1 The synergetic antibacterial effects of amine terminated dendritic groups/ cationic gemini surfactant on cotton goods Fibers, Films and Polymeric Membranes
A-10-2237-3 Investigating electrospinning conditions on the mechanical properties of polyamid (PA) fibers Fibers, Films and Polymeric Membranes
A-10-2344-1 Hydrazone-linked covalent organic frameworkPSf/PVP mixed matrixed membrane: A new approach to dye wastewater purification Fibers, Films and Polymeric Membranes
A-10-2473-2 Fabrication and characterization of Polyvinylidene Fluoride Nanofiltration Membrane for Wastewater Treatment Fibers, Films and Polymeric Membranes
A-10-2378-1 Polyurethane / cellulose /activated carbon nanocomposite membranes for removal of methylene blue from water Fibers, Films and Polymeric Membranes
A-10-2416-1 Surface Modification of Polypropylene Hollow Fiber Ultrafiltration Membrane by plasma and polyethylene glycol Fibers, Films and Polymeric Membranes
A-10-2414-1 Investigation of solvent system Effect on alginate sulfate/polyvinyl alcohol electrospun nanofibers Fibers, Films and Polymeric Membranes
A-10-2390-2 Using polyaniline/montmorillonite adsorbent nanocomposite to remove tannic acid pollutant from water environment Fibers, Films and Polymeric Membranes
A-10-2480-1 Preparation and Properties of Blend Membranes of Highly Sulfonated Polysulfone/Fully Fluorinated Poly(Aryl Ether) for Proton Exchange Membrane Fuel Cell Application Fibers, Films and Polymeric Membranes
A-10-2480-2 Effect of Sulfonation Degree and Thermal Treatment on the Stability and Proton Conductivtiy of Blend Membranes of Highly Sulfonated Polysulfone/Fully Fluorinated Poly(Aryl Ether) for Fuel Cell Application Fibers, Films and Polymeric Membranes
A-10-2480-3 Preparation and Properties of Polycarbonate/ Polysulfone Blend Membranes for Potential Application in Water Tretment Fibers, Films and Polymeric Membranes
A-10-2122-1 Design and Characterization of Electrospun PVDF Nanofibers Containing Graphene Oxide/Metal-Organic Framework Composites for Potential Piezoelectric Applications Fibers, Films and Polymeric Membranes
A-10-2109-1 Application of PNANI/MWCNT/Cu Nanofibrous Electrode in Detection of Nitrate Ions Fibers, Films and Polymeric Membranes
A-10-2106-1 Synthesis of thermoplastic polyurethane membranes with different molar ratios and investigation of their CO2/N2/H2 gases permeability Fibers, Films and Polymeric Membranes
A-10-2378-2 Polyurethane / cellulose /activated carbon nanocomposite membranes for removal of basic violet 16 from water Fibers, Films and Polymeric Membranes
A-10-2523-1 Fabrication of Zirconium Oxide Complex Bridged by  Terephthalic Ligands (UIO66)-PVDF Mixed Matrix Membrane for Lithium Ion Battery Separator Fibers, Films and Polymeric Membranes
A-10-2576-1 The effect of Mg-Al layered double hydroxide nanoparticles on the performance of polycarbonate membranes in water treatment Fibers, Films and Polymeric Membranes
A-10-2591-1 Preparation of hydrogel nanofibers of lignin through electrospinning Fibers, Films and Polymeric Membranes
A-10-2162-3 Evaluation of Electrolyte role on the Surface Properties of Synthetic Fiber by a Chemical Process Fibers, Films and Polymeric Membranes
A-10-2618-1 Investigating the effect of Cu nanoparticles on the absorption of basic dyes on PAN nanofibers Fibers, Films and Polymeric Membranes
A-10-2557-1 Preparation of micro-nano structure from polyacrylonitrile (PAN) by electrospun and selective removal Fibers, Films and Polymeric Membranes
A-10-2638-1 Surface modification of Poly Ether Block Amide membrane – The Role of amine compounds in carbon dioxide gas separation properties Fibers, Films and Polymeric Membranes
A-10-2638-2 Study of Surface Modification of Pebax-2533 Membrane by Mediocrity-Sized Amine Compounds on CO2 Gas Separation Properties Fibers, Films and Polymeric Membranes
A-10-2523-2 Zeolitic imidazolate frameworks (Zif 67) Mixed Matric Membrane in CO2 Separation: Fabrication and Permeability Study Fibers, Films and Polymeric Membranes
A-10-2734-1 Flexible cation exchange membrane based on modified K-Carrageenan/PVA double network hydrogel with high ionic conductivity Fibers, Films and Polymeric Membranes
A-10-2035-1 Mimicked Tri-layer Scaffold for Chemo-Photothermal Therapy of Breast Cancer Cells Green and Environmentally Sustainable Biopolymers
A-10-2096-1 Accelerated wound healing through a Poly-vinyl alcohol/chitosan/honey/clay nanocomposite hydrogel wound dressing Green and Environmentally Sustainable Biopolymers
A-10-2110-1 Toughness enhancement of Poly(lactic) acid as a biopolymer by the use of Polybutadiene rubber Green and Environmentally Sustainable Biopolymers
A-10-2035-2 Chemo-Phototherapy of Breast Cancer Cells by Dopamine Nanoparticles Embeded in Alginate Hydrogels Green and Environmentally Sustainable Biopolymers
A-10-2107-1 LLDPE/Cellulose Microfiber/Nanoclay Nanocomposites Based on Insitu Intercalated Nanoclay Green and Environmentally Sustainable Biopolymers
A-10-2049-1 Environmental aspects of using seawater-based polymer systems in improving water-based drilling fluids properties Green and Environmentally Sustainable Biopolymers
A-10-2617-2 The effect of eggshell powder on biodegradability and permeation of PLA Films Green and Environmentally Sustainable Biopolymers
A-10-2280-1 The green synthesis of silver nanoparticles on cotton fabrics by Henna leaves extract Green and Environmentally Sustainable Biopolymers
A-10-2107-3 Morphological and mechanical properties of PLA/PBAT/Nanoclay Bionanocomposite films for food packaging Green and Environmentally Sustainable Biopolymers
A-10-2362-1 Alginate/citric acid-sawdust/Fe3O4 bio-adsorbent for malachite green removal from aquatic solutions Green and Environmentally Sustainable Biopolymers
A-10-2283-1 Investigation on mechanical properties of basil seed gum/ graphene oxide nanocomposite Green and Environmentally Sustainable Biopolymers
A-10-2283-2 Hybridization of graphene oxide with tragacanth gum to diminish its cytotoxicity effect Green and Environmentally Sustainable Biopolymers
A-10-2392-1 Investigation of the microstructure, mechanical properties, biodegradability of nanocomposites of PCL/GO-ZnO Green and Environmentally Sustainable Biopolymers
A-10-2297-1 Fabrication of Alginate-carboxymethyl cellulose blend beads via Titanium(IV) oxide/Covalent organic frameworks hybrids under ultrasonic irradiation Green and Environmentally Sustainable Biopolymers
A-10-2142-2 Production of biodegradable polylactic acid polymer from agricultural waste Green and Environmentally Sustainable Biopolymers
A-10-2476-1 Effect of PLA on tensile properties of soft PVC Green and Environmentally Sustainable Biopolymers
A-10-2472-2 Synthesis of green magnetic biopolymer tannin gel in the simultaneous removal of Malachite green and Sunset Yellow dyes Green and Environmentally Sustainable Biopolymers
A-10-2545-1 Manufacturing and Characterizing of Interpenetrating Polymer Network Films Based on Carboxymetheyl Cellulose and Tetraethylorthosilicate Green and Environmentally Sustainable Biopolymers
A-10-2646-1 An assessment on morphological and thermal properties of the poly (lactic acid)/poly (butylene adipate-co-terephthalate) films with chain extender Green and Environmentally Sustainable Biopolymers
A-10-2463-3 Effects of Lauroyl Peroxide on Structural Modification and Physical Properties of Polylactic Acid Green and Environmentally Sustainable Biopolymers
A-10-2513-1 Preparation and properties of biodegradable PLA/PBAT/Nanoclay nanocomposite Green and Environmentally Sustainable Biopolymers
A-10-2052-3 Performance evaluation of clarithromycin-loaded poly (ε-caprolactone) nanoparticles: A comparison between microfluidic and bulk mixing methods Nano-structured Polymers and Smart Systems
A-10-2021-1 Transparent film heater based on silver nanowires Nano-structured Polymers and Smart Systems
A-10-2052-4 Preparation and characterization of propargylated electrospun cellulose acetate nanofibers as precursor for click chemistry Nano-structured Polymers and Smart Systems
A-10-2044-2 Chitosan-based Microneedle Patches containing Insulin-Cyclodextrin for Sustained Transdermal Delivery Nano-structured Polymers and Smart Systems
A-10-2044-3 Synthesis and Characterization PVA Electro-Spun Nanofibers Containing Encapsulated Vitamin C in Chitosan Microspheres Nano-structured Polymers and Smart Systems
A-10-2131-1 Preparation of thermoswitchable chromic nanocapsules containing leuco-dye via miniemulsion polymerization Nano-structured Polymers and Smart Systems
A-10-2131-2 Thermo- and photo-switchable nanocapsules containing leuco-dye mixture and spiropyran Nano-structured Polymers and Smart Systems
A-10-2201-1 Covalent triazine-based framework as a pH-dependent sustained-release nanocarrier for anticancer drug Nano-structured Polymers and Smart Systems
A-10-2049-3 A comparative review of the performance of different nanopolymers in improving the properties of drilling fluids Nano-structured Polymers and Smart Systems
A-10-2269-1 Synthesis of organo-soluble gold nanoparticles on poly(N,N-dimethyl aminoethyl methacrylate) Nano-structured Polymers and Smart Systems
A-10-2272-1 Superhydrophobic polyurethane foams coated with Flurobutanol modified rGO nanosheets for effective continuous oil-water separation Nano-structured Polymers and Smart Systems
A-10-2279-1 Effects of polarity and functionality on optical properties of fluorescent polymer nanocarriers Nano-structured Polymers and Smart Systems
A-10-2256-1 Development of pH sensing light-responsive polymer nanoparticles Nano-structured Polymers and Smart Systems
A-10-2302-1 Polyaniline nanoparticles suspension: Ion exchange behavior Nano-structured Polymers and Smart Systems
A-10-2056-1 Effect of the Structure of Activated Carbon on the Absorption Property Nano-structured Polymers and Smart Systems
A-10-2314-1 Enhancement of the PVDF’s Piezoelectricity by magnetic-conductive hybrid nanoparticle-nanoplates Nano-structured Polymers and Smart Systems
A-10-2319-1 Reduction-sensitive flower like magnetomicelle based on PCL-ss-PEG-ss-PCL triblock copolymer as anti-cancer drug delivery system Nano-structured Polymers and Smart Systems
A-10-2324-1 Preparation of tosyl cellulose acetate nanoparticles via nanoprecipitation Nano-structured Polymers and Smart Systems
A-10-2332-1 Investigation of Effect of Electrospinning Parameters on Morphology of Polyvinyl Alcohol Nanofibers Nano-structured Polymers and Smart Systems
A-10-2332-2 The Influence of Electrospinning Parameters on Morphological Properties of Polyamide-6,6 Nanofibers Nano-structured Polymers and Smart Systems
A-10-2549-1 Acidichromic behavior of N,N-dihydroxyethyl azobenzene doped in poly(methyl methacrylate) Nano-structured Polymers and Smart Systems
A-10-2395-1 Synthesis of Spiropyran Functionalized Polymer Nanoparticles and Investigation the Effect of Local Polarity on Kinetics of Photoresponsivity Nano-structured Polymers and Smart Systems
A-10-2342-1 Aqueous Electrospinning of Carboxymethyl Chitosan sulfate/Polyethylene Oxide Nanofibers Nano-structured Polymers and Smart Systems
A-10-2383-2 Fabrication of drug-carrying nanocomposites from polylactic acid, polyethylene glycol and hydroxyapatite Nano-structured Polymers and Smart Systems
A-10-2472-1 Study on the preparation, properties, and performance of new superparamagnetic nanocomposite of PANI-Fe3O4-TiO2 in polymer solar cells Nano-structured Polymers and Smart Systems
A-10-2200-1 The Release Behavior of Tetracycline hydrochloride (TCH) from Carboxymethyl Chitosan (CMCS)/ Montmorrilonite (MMT) Microcapsules Nano-structured Polymers and Smart Systems
A-10-2384-2 Chamomile Extracted Polyphenol Based Nanoparticles Made by Oxidative Coupling Assembly Nano-structured Polymers and Smart Systems
A-10-2504-2 Synthesis and Characterization of Reversible Photochromic Spiropyran Containing Ionic Liquid Nano-structured Polymers and Smart Systems
A-10-2385-3 Wearable electronic nose sensor based on PVDF/ carbon black electrospun layers Nano-structured Polymers and Smart Systems
A-10-2528-1 Synthesis of Amide Functionalized Photoluminescent Polymer Nanoparticles Containing Oxazolidine for Development of Photoluminescence OLEDs Nano-structured Polymers and Smart Systems
A-10-2535-1 Preparation of dual emission MXene  derived quantum dots Nano-structured Polymers and Smart Systems
A-10-2459-1 Surface modification of silica aerogel nanostructure by citric acid for wastewater treatment Nano-structured Polymers and Smart Systems
A-10-2393-2 Investigation the Effect of Polymer Chain Flexibility on Kinetics of Spiropyran Photochromism in Copolymer Nanoparticles Nano-structured Polymers and Smart Systems
A-10-2486-1 Biodegradable Thermoplastic Vulcanizate Nanocomposite with Thermoresponsive Shape Memory Behavior Based on PLA/NBR/CNC Nano-structured Polymers and Smart Systems
A-10-2347-3 Investigation of the strain sensing performance of PP/EPDM/CNT nanocomposites Nano-structured Polymers and Smart Systems
A-10-2590-1 Fabrication of Self-Healing Hydrogels Through Inclusion Complexation of Vinyl Modified Macrocyclic Monomers Nano-structured Polymers and Smart Systems
A-10-2603-1 Supramolecular Hydrogels Using Host-Guest Inclusion Complexes with Cyclodextrins Nano-structured Polymers and Smart Systems
A-10-2609-1 Modification of cellulose paper with photoluminescent acrylic copolymer nanoparticles containing fluorescein as pH-sensitive indicator Nano-structured Polymers and Smart Systems
A-10-2635-1 Fluorescent Polymer Nanoparticles as pH Sensor platforms Nano-structured Polymers and Smart Systems
A-10-2660-2 Determining the pKa value of the fourth generation poly(propylene imine) dendrimer functionalized with 4-carboxyphenylboronic acid by pH titration method Nano-structured Polymers and Smart Systems
A-10-2041-3 Preparation and characterization of semi-IPN magnetic nanocomposite hydrogels based on partially hydrolyzed polyacrylamide/guar gum/ Fe3O4SiO2 NPS for enhanced oil recovery Polymer Blends, Composites and Nano-composites
A-10-2057-1 Preparation of Flexible shields for Protection against Gamma Rays Polymer Blends, Composites and Nano-composites
A-10-2083-1 Preparation and investigation the properties of graphene-reinforced nanocomposites based on PMMA/PEO Polymer Blends, Composites and Nano-composites
A-10-2082-1 Preparation and X_COM simulation of X-ray epoxy-based polymer shielding Polymer Blends, Composites and Nano-composites
A-10-2125-2 Gel polymer electrolyte based on synthsised organic-inorganic nanoparticles/PVDF Polymer Blends, Composites and Nano-composites
A-10-2190-1 Conductive Polyacrylamide Aerogel Polymer Blends, Composites and Nano-composites
A-10-2203-1 Synergistic effect of hybrid Halloysite nantube– Calcium Carbonate as a nanofiller in enhancing the mechanical properties of PVC composites Polymer Blends, Composites and Nano-composites
A-10-2271-1 Improving fire performance of thermoplastic Polyurethane with an intumescent Flame Retardant system and Nanomolybdenum disulfide Polymer Blends, Composites and Nano-composites
A-10-2287-1 Study of MA-POSS nanoparticles dispersion in the Poly(ethylene glycol) dimethacrylate (PEGDMA) matrix Polymer Blends, Composites and Nano-composites
A-10-2250-2 Effect of Alumina Nanoparticles on of the Fracture behaviour of Epoxy Nanocomposites Polymer Blends, Composites and Nano-composites
A-10-2082-3 Review of Properties, application, dispersion, and compatibilizing of some mineral particles in the presence of branched/ functional polymers Polymer Blends, Composites and Nano-composites
A-10-2258-2 The influence of crosslinked acrylonitrile-styrene-acrylate impact modifier on the mechanical and thermal properties of rigid poly(vinyl chloride) Polymer Blends, Composites and Nano-composites
A-10-2300-1 The Influence of Silica Localization on the Mechanical Behavior of Polyamide 6- Reclaimed Rubber Blends Polymer Blends, Composites and Nano-composites
A-10-2032-1 The synergistic effect of graphene nano-platelets and antioxidant in improving the thermo-oxidative stability of high-density polyethylene Polymer Blends, Composites and Nano-composites
A-10-2251-1 Mechanical and electroconductive properties of glass fiber reinforced polyethylene filled with graphite Polymer Blends, Composites and Nano-composites
A-10-2251-2 Improvement of thermal properties of polypropylene and investigation of mechanical properties of Cyclic Copolymer/polypropylene blend Polymer Blends, Composites and Nano-composites
A-10-2306-1 Mechanical improvement of Glass fiber/PA66 composite using surfacemodified glass fiber and SEBS-g-MA as an Impact modifier Polymer Blends, Composites and Nano-composites
A-10-2312-1 Epoxidized Natural Rubber as a Compatibilizer in Chlorosulfonated PE/Organoclay Nanocomposites Polymer Blends, Composites and Nano-composites
A-10-2286-4 The Investigation of Solvent Synergy Effect on Conjugated Polymer Photo-physics Properties: A Case Study of MEH-PPV Polymer Blends, Composites and Nano-composites
A-10-2210-1 Investigating of nanofiber orientation on the ILSS of epoxy resin/ glass fiber composite laminates. Polymer Blends, Composites and Nano-composites
A-10-2250-3 Synthesis of Polyurethane Nanocomposites and Investigation of Their Mechanical Properties Polymer Blends, Composites and Nano-composites
A-10-2339-1 Rheology, Morphology and Electrical Conductivity of Polyethylene  (PE)/Ethylene vinyl acetate (EVA) Blends Filled with Carbon Black Polymer Blends, Composites and Nano-composites
A-10-2340-1 The Effect of Pre-impregnated Tape Width on Printability and Shear Properties of Continuous Fiber-Reinforced Composites Polymer Blends, Composites and Nano-composites
A-10-2343-1 Theoretical and Experimental Study on Aluminum Particulate Composites as Thermal Radiation Barrier Polymer Blends, Composites and Nano-composites
A-10-2328-1 The relationship between hydrogen bonding, degree of crystallinity and shape memory behavior of PU/Fe3O4 nanocomposites Polymer Blends, Composites and Nano-composites
A-10-2340-2 The influence of nano and micro SiO2 particles on the mechanical behavior of 3D printed samples Polymer Blends, Composites and Nano-composites
A-10-2341-1 Thermodynamical Evaluation of the Reinforcing Mechanism in Graphene Oxide/ Acrylonitrile Butadiene Rubber Composites Polymer Blends, Composites and Nano-composites
A-10-2286-3 Study on photo-physical properties of semi-conducting polymers with different feeding manners: A Case Study of MEH-PPV Polymer Blends, Composites and Nano-composites
A-10-2159-1 Low Density Polyethylene based Micro/Nanocomposites: Feasibility of Calendering Process Polymer Blends, Composites and Nano-composites
A-10-2634-1 Synergistic Effect of Cellulose Nanofibers lamina  and clay nanoParticles on Mechanical Properties of Epoxy Resin Polymer Blends, Composites and Nano-composites
A-10-2371-1 Crystallization and Micro-Phase Separation of Thermoplastic Polyurethane/Polyaniline Blends: Influence of Polyaniline Nanorods Content Polymer Blends, Composites and Nano-composites
A-10-2387-1 Investigation on permeability of packaging films based on Polyethylene/Ethylene vinyl alcohol/Nanoclay nanocomposite Polymer Blends, Composites and Nano-composites
A-10-2374-1 Effect of GO-ZnO nanohybrid on biodegradability and mechanical properties of Polybutylene succinate Polymer Blends, Composites and Nano-composites
A-10-2457-1 Epoxy/Amine Dual-Curable System Prepregs: Changes of Viscosity by Different Cure Systems and Cure Cycles Polymer Blends, Composites and Nano-composites
A-10-2159-2 Nanoclay/Kenaf/Polyester Hybrid Composites: Synergistic Effects on Energy Absorbance Polymer Blends, Composites and Nano-composites
A-10-2477-1 Influence of Speed Print and Raster Angle on the Mechanical Properties of ABS Polymer Parts Produced by Fused Deposition Modelling Polymer Blends, Composites and Nano-composites
A-10-2355-1 Effect of Graphite Oxide on the Shape Stabilization of Polyethylen Glycol Phase Change Materials Systems Polymer Blends, Composites and Nano-composites
A-10-2626-1 Investigation of Conductivity, Rheological and Morphological Properties of High Density Polyethelene Filled with Carbon Black Polymer Blends, Composites and Nano-composites
A-10-2495-2 Investigating the effect of Oscillatory shear strain on the dielectric properties of PS/TiO2 nanocomposite Polymer Blends, Composites and Nano-composites
A-10-2236-1 Synthesis and characterization of thermoplastic polyurethane composite based on epoxy filler Polymer Blends, Composites and Nano-composites
A-10-2100-3 The effects of reduced graphene oxide on thermal properties of polylactic acid/ethylene vinyl-acetate copolymer blends Polymer Blends, Composites and Nano-composites
A-10-2386-1 Effect of Elastomer Type on Spherulitic Structure and Deformation Behavior of Isotactic Polypropylene Polymer Blends, Composites and Nano-composites
A-10-2368-1 Morphology, mechanical properties and melt rheology of PLA/EVA blend reinforced with silicon carbide (SiC) nanoparticles Polymer Blends, Composites and Nano-composites
A-10-2512-1 Bending behavior of Glass/ Epoxy multilayer sandwich composites reinforced with weft-knitted spacer fabrics Polymer Blends, Composites and Nano-composites
A-10-2527-2 The effect of zinc stearate on the processability of high density polyethylene (HDPE) Polymer Blends, Composites and Nano-composites
A-10-2252-1 Preparation of new fillers based on polyurethane and their application in 3D printing resins Polymer Blends, Composites and Nano-composites
A-10-2255-1 Investigation of Polyurethane-based Elastomeric Microcomposites Reinforced with Titanium Dioxide (TiO2) Polymer Blends, Composites and Nano-composites
A-10-2340-3 An investigation of the effect of fiber surface treatment on the flexural properties of 3D printed composites Polymer Blends, Composites and Nano-composites
A-10-2255-3 Melt Processing of Acrylonitrile-butadiene-styrene (ABS) on Liquid Deposition Modeling (LDM) 3D Printing and Injection Molding: Process Feasibility Polymer Blends, Composites and Nano-composites
A-10-2172-1 Removal of basic violet-16 cationic dye from aqueous solution by novel nanocomposite hydrogel containig of halloysite nanoclay Polymer Blends, Composites and Nano-composites
A-10-2172-2 Synthesis of new hydrogel nanocomposite based on acrylamide and its application to remove Basic violet 16 dye from water Polymer Blends, Composites and Nano-composites
A-10-2551-1 Effect of Core Material on the Mechanical Properties of Hybrid CFRP Sandwich Composites Polymer Blends, Composites and Nano-composites
A-10-2515-1 The effect of the hybrid presence of two nanoparticles on improving the toughness of PLA/NR eco-friendly blend Polymer Blends, Composites and Nano-composites
A-10-2645-1 Flammability reduction of flexible polyurethane foams using GO and LDH nanoparticles-based multilayer coatings Polymer Blends, Composites and Nano-composites
A-10-2472-3 Synthesis of grapheneFe3O4polyaniline nanocomposite for simultaneous removal of a binary mixture of Malachite Green cationic dye and Acid Red 1 anionic dye from aqueous solutions Polymer Blends, Composites and Nano-composites
A-10-2596-1 Polyacrylamide hydrogel conductivity enhancement, the efficiency of MWCNT composition methods Polymer Blends, Composites and Nano-composites
A-10-2598-1 Effect of nanoparticles concentration on electrical conductivity of a TPU/MWCNT nanocomposite Polymer Blends, Composites and Nano-composites
A-10-2578-1 Solid and semi-liquid state foaming of polypropylene copolymers towards production of expanded polypropylene beads with double melting peaks Polymer Blends, Composites and Nano-composites
A-10-2658-1 Study on the effect of heat treatment on the tensile properties of nanofibrous composites Polymer Blends, Composites and Nano-composites
A-10-2610-1 Compatibilized PE/PP blends for the property enhancement of PE/PP waste Polymer Blends, Composites and Nano-composites
A-10-2605-1 Effect of soybean oil on dynamic mechanical properties of Epoxy/Polyurethane IPNs Polymer Blends, Composites and Nano-composites
A-10-2556-1 Fabrication of Thin Film Nanocomposite Based on PVB and SWCNTs as a Transparent Electrode in Photovoltaic Applications  by Spin Coating Polymer Blends, Composites and Nano-composites
A-10-2620-1 Biodegradable  PBAT/EVOH/Zinc oxide nano composites Polymer Blends, Composites and Nano-composites
A-10-2497-2 Investigating the Toughness and Tensile Strength of Epoxy Nanocomposites Based-Ionic Modified SiO2 Nanoparticles. Polymer Blends, Composites and Nano-composites
A-10-2637-2 Correlation between morphology and mechanical properties in low density polyethylene/ethylene vinyl acetate copolymer blends Polymer Blends, Composites and Nano-composites
A-10-2729-1 The Influences of the POE-MAH compatibilizer on the morphology, mechanical, and Rheological behavior of N6/PC/GO nanocomposites Polymer Blends, Composites and Nano-composites
A-10-2731-1 EVA noanocomposite Foams Containing MWCNT as Electromagnetic Wave Absorbent. Polymer Blends, Composites and Nano-composites
A-10-2721-1 Conductive nanocomposite hybrid and biopolymer in presence of metal oxide particles for sensor applications Polymer Blends, Composites and Nano-composites
A-10-2325-1 Optically transparent Eudragit nanofibrous membrane with potential use in ocular tissue engineering Polymer in Biomedical and Tissue Engineering
A-10-2204-1 Influence of PMMA bone cement composition on its mechanical properties Polymer in Biomedical and Tissue Engineering
A-10-2213-1 Modification and evaluation of Polylactic Acid (PLA) for improved its hemocompatibility and hydrophilicity Polymer in Biomedical and Tissue Engineering
A-10-2213-2 Evaluation of chemical functionalization of Polylactic Acid as a spacer for surface immobilization of biomacromolecules Polymer in Biomedical and Tissue Engineering
A-10-2225-1 Synthesis of nano-Gelatin Containing  Curcumin and Investigating the Effect of Glutaraldehyde as a Crosslinker in Drug Delivery Polymer in Biomedical and Tissue Engineering
A-10-2229-1 Laboratory investigation of the effect of carbon nanotubes used in polyacrylamide preformed particle gels on Conformance control of high water production wells Polymer in Biomedical and Tissue Engineering
A-10-2233-1 Toxicity assessments of polymeric nanoparticles in biomedicine Polymer in Biomedical and Tissue Engineering
A-10-2242-1 Hydroxyapetite / Polysaccharides Composite Hydrogels as Biocompatible Nano-carriers for Bone infection Polymer in Biomedical and Tissue Engineering
A-10-2268-1 Fabrication of a self-healing antibacterial hydrogel using β-cyclodextrin dimer/modified alginate/AgNO3 Polymer in Biomedical and Tissue Engineering
A-10-2212-1 Polycaprolactone/Pluronic F127 scaffold fabricated by 3D printing for bone tissue engineering Polymer in Biomedical and Tissue Engineering
A-10-2193-1 Gelatin nanofibers incorporating ZIF-8 nanoparticles as wound dressings Polymer in Biomedical and Tissue Engineering
A-10-2233-3 Biodegradable polymeric micelles for biomedical applications Polymer in Biomedical and Tissue Engineering
A-10-2066-6 The study of Poly (erythritol-co-dodecanedioate)/ lignocellulose nanofiber for tissue engineering application Polymer in Biomedical and Tissue Engineering
A-10-2204-3 Aplying k-means clustring technique on physical and mechanical properties of various PMMA/silica bone cements Polymer in Biomedical and Tissue Engineering
A-10-2402-1 Rheological and structural behavior of gellan-agar comprising poly aniline-graphene nanocomposite as a candidate for neural conduit Polymer in Biomedical and Tissue Engineering
A-10-2223-1 Reinforcement of nanofibrous scaffolds based on polylactic acid/alginate using platelet-enriched plasma Polymer in Biomedical and Tissue Engineering
A-10-2031-1 Synthesize of hydrogel nanocarriers for controlled release of anti-cancer drug Polymer in Biomedical and Tissue Engineering
A-10-2361-1 Assessing printability map of PLA solution in immersion precipitation 3D printing (ip3DP) Polymer in Biomedical and Tissue Engineering
A-10-2363-1 Reinforced poly (lactic acid) by modified cellulose nanofibers extracted from rice straw applicable for tissue engineering Polymer in Biomedical and Tissue Engineering
A-10-2224-1 Investigating the hydrophilic properties of polycaprolactone containing Capparis spinosa extract for use in tissue engineering applications Polymer in Biomedical and Tissue Engineering
A-10-2396-1 Gelatin/polycaprolactone composites as bioinspirated scaffolds for tissue engineering Polymer in Biomedical and Tissue Engineering
A-10-2353-1 Preparation and characterization of DOX delivery carrier by polymer/silica nanostructure Polymer in Biomedical and Tissue Engineering
A-10-2303-1 Electrospun polyurethane (PU) nanofibers for vascular graft application Polymer in Biomedical and Tissue Engineering
A-10-2304-1 Soft contact lenses with high oxygen permeability and high surface wettability Polymer in Biomedical and Tissue Engineering
A-10-2405-1 The comparison between degradation of polymeric in-situ forming implants in in-vitro and in-vivo conditions Polymer in Biomedical and Tissue Engineering
A-10-2179-1 Preparation of Hydrophobic Acrylic Foldable Intraocular Lens for Cataract Surgery Polymer in Biomedical and Tissue Engineering
A-10-2253-3 Synthesis and characterization of thermosensitive gel containing PCL nanoparticles as a promising candidate for drug delivery Polymer in Biomedical and Tissue Engineering
A-10-2342-2 Printability study of polyelectrolyte bioinks based on chitosan for 3Dbioprinting applications Polymer in Biomedical and Tissue Engineering
A-10-2405-2 A study on accelerated drug release from in-situ forming implants and the correlation with real-time profiles Polymer in Biomedical and Tissue Engineering
A-10-2490-1 Synthesis and characterization of polyurethane bioadhesive based on castor oil Polymer in Biomedical and Tissue Engineering
A-10-2200-2 PVA hydrogels incorporated with croboxymethyl chitosan microcapsules containing tetracycline hydrochloride: morphology and antibacterial behavior Polymer in Biomedical and Tissue Engineering
A-10-2070-1 The effect of titanium dioxide nanoparticles on the morphology and physical/mechanical properties of poly(L-lactic acid)/gelatin hybrid nanofibers as potential scaffolds in tissue engineering Polymer in Biomedical and Tissue Engineering
A-10-2133-1 Preparation and Characterization of Novel Antibacterial Waterborne Polyurethane Electrospun Fibers Based on Tannin for Wound Dressing Application Polymer in Biomedical and Tissue Engineering
A-10-2568-1 Printability of thiol-ene photoclick initiated bioinks Polymer in Biomedical and Tissue Engineering
A-10-2542-1 Development of a novel duple acrylic coating with an anti-fungal effect for bio applications Polymer in Biomedical and Tissue Engineering
A-10-2541-2 Investigating the mechanical properties of hydrogel nanocomposite with lignin nanoparticles: A short review Polymer in Biomedical and Tissue Engineering
A-10-2067-1 PLA/NMP system containing silica hybrids for bone tissue engineering Polymer in Biomedical and Tissue Engineering
A-10-2491-2 Multi-Functional Core–Shell Nanofibrous Scaffolds for Accelerating Wound  Healing Polymer in Biomedical and Tissue Engineering
A-10-2599-1 Synthesis and characterization of carboxymethylhexanoyl chitosan as a promising biomatherial Polymer in Biomedical and Tissue Engineering
A-10-2600-1 Preparation of bone tissue scaffold with improved biocompatibility, comprising of PCL and PVDF nanofibers via electrospinning process Polymer in Biomedical and Tissue Engineering
A-10-2612-1 3D printing of alginate/gelatin scaffold reinforced by nanofibers with hydroxyapatite coating for bone tissue engineering Polymer in Biomedical and Tissue Engineering
A-10-2613-1 Interpenetrating polymer networks of poly(2-hydroxyethyl methacrylate) and poly(dimethyl siloxane) films for biomedical applications Polymer in Biomedical and Tissue Engineering
A-10-2615-1 Waterborne polyurethane films impregnated with AgGO-PDA nanostructures for photothermal therapy of infected dermal wounds Polymer in Biomedical and Tissue Engineering
A-10-2602-1 Efficacy of biocompatible polymers polyethylene glycol and chitosan in surface modification of carbon nanotubes for medical application Polymer in Biomedical and Tissue Engineering
A-10-2575-1 Investigating the rheological and hydrophilic behavior of polyethylene glycol (monomethyl ether)-maleic anhydride Polymer in Biomedical and Tissue Engineering
A-10-2518-1 Optimization of polycaprolactone and collagen polymers for tissue engineering applications Polymer in Biomedical and Tissue Engineering
A-10-2400-2 PU foam with interior walls of PCL nanofibers Polymer in Biomedical and Tissue Engineering
A-10-2400-3 Facile Technique for GelMA Synthesis Providing Increased Methacrylation Degree Polymer in Biomedical and Tissue Engineering
A-10-2607-2 The effect of chitosan- biopolymer as coated solid lipid nanoparticles in mucoadhesive drug delivery Polymer in Biomedical and Tissue Engineering
A-10-2625-2 Preparation of poly(vinyl alcohol)/Sodium alginate nanofibers Polymer in Biomedical and Tissue Engineering
A-10-2640-3 Preparation and Characterization of Hybrid PCL/Collagen Sponge Polymer in Biomedical and Tissue Engineering
A-10-2072-1 The effect of carboxymethylcellulose on the cellular structure of polyethylene foam Polymer Synthesis and Polymerization
A-10-2073-1 Effect of the organic additive on the polyvinyl chloride nanocomposite properties Polymer Synthesis and Polymerization
A-10-2073-2 Study on mechanical and thermal properties of polyvinyl chloride nanocomposites reinforced with the azo-containing phenol derivative Polymer Synthesis and Polymerization
A-10-2085-1 Synthesis of Well-known RAFT Agent for Living Polymerization of 2-Hydroxyethyl Methacrylate (HEMA) Polymer Synthesis and Polymerization
A-10-2081-1 Synthesis and application of grafted microcrystalline cellulose with imidazolium-based ionic liquid for demulsification of W/O emulsion Polymer Synthesis and Polymerization
A-10-2100-1 Rheological properties of PE-b-PEG block copolymer in selective solvent Polymer Synthesis and Polymerization
A-10-2262-1 Synthesis of chitosan/polyvinyl alcohol beads for adsorption of copper from aqueous solution Polymer Synthesis and Polymerization
A-10-2426-1 Using Raman and FTIR spectroscopy for demonstrate fillers in polypropylene compound structure Polymer Synthesis and Polymerization
A-10-2117-1 Investigation of acid and base treatment of halloysite on catalytic performance in Poly-alpha-olefin hydrogenation reaction Polymer Synthesis and Polymerization
A-10-2117-2 Effect of various catalyst supports in catalytic activity for Poly-alpha-olefin hydrogenation Polymer Synthesis and Polymerization
A-10-2036-1 Effect of Castor Oil Content on Viscosity of Castor TDI Prepolymers Polymer Synthesis and Polymerization
A-10-2118-1 Effect of alcohol content of support on the catalytic performance of Ziegler-Natta catalysts in propylene polymerization Polymer Synthesis and Polymerization
A-10-2069-1 Random copolymerization of alpha-olefins with functional monomers by cationic AlCl3/H2O catalytic system Polymer Synthesis and Polymerization
A-10-2129-1 Halloysite and ionic liquid composites as catalysts for oligomerization and hydrogenation of polyalphaolefins Polymer Synthesis and Polymerization
A-10-2129-2 Synthesis of polymer-Clay composite with application for hydrofinishing reactions Polymer Synthesis and Polymerization
A-10-2120-1 Novel mesoporous melamine-rich covalent organic polymer/cupric oxide-based microgel beads as promising robust heterogeneous nanocatalyst for highly efficient catalytic reduction of emerging water pollutants:… Polymer Synthesis and Polymerization
A-10-2134-1 Novel AlCl3 /ionic-liquid initiator system for the polymerization of isobutylene to conventional grade PIB Polymer Synthesis and Polymerization
A-10-2672-1 Preparation and mechanical characterization of the polyurethane and vitrimers polymers Polymer Synthesis and Polymerization
A-10-2036-3 Synthesis of Waterborne Epoxy Based on E6 and Diethanolamine Polymer Synthesis and Polymerization
A-10-2215-2 Investigation the effects of Temperature & Oxygen on the epoxy resin yellowing during synthesis Polymer Synthesis and Polymerization
A-10-2101-1 Investigating the electron-withdrawing effect of aryl substituents in the catalytic behavior of α-diimine nickel (II) catalyst on ethylene polymerization Polymer Synthesis and Polymerization
A-10-2101-2 Investigating the electron-donating effect of aryl substituents in the catalytic behavior of α-diimine nickel (II) catalyst on ethylene polymerization Polymer Synthesis and Polymerization
A-10-2225-2 Evaluation of the Toluene Progen Effect on Porous Polymer Emulsion  Poly (Styrene-Divinylbenzene) Polymer Synthesis and Polymerization
A-10-2040-1 Molecular and Morphological Studies to Understand the Strain Hardening Behavior of UHMWPE/HDPE blends Polymer Synthesis and Polymerization
A-10-2230-1 Synthesis and characterization amino-modified magnetic core-shell triazine-based covalent organic polymer as an efficent dye adsorbent Polymer Synthesis and Polymerization
A-10-2111-1 Synthesis of new Ziegler Nata catalyst based on magnesium ethoxide with controlled morphology in the presence of different internal donor structures for polypropylene polymerization Polymer Synthesis and Polymerization
A-10-2238-1 Flexible cellulose/PEGEMA based solid and gel polymer electrolytes Polymer Synthesis and Polymerization
A-10-2238-2 Cellulose-based polymer electrolytes for electrochemical devices Polymer Synthesis and Polymerization
A-10-2114-2 Synthesis of Low Viscosity Polyalfaolefin Oils Using Deep Eutectic Solvent/ Aluminium chloride  system Polymer Synthesis and Polymerization
A-10-2268-2 Synthesis and characterization of chromium-based heterogeneous catalysts containing tridentate ligands for the production of 1-hexene Polymer Synthesis and Polymerization
A-10-2278-1 Effect of molecular weight on the performance of asymmetric polysulfone membranes Polymer Synthesis and Polymerization
A-10-2098-1 Smart block copolymers as fluorescence chemosensors Polymer Synthesis and Polymerization
A-10-2289-1 Synthesis of bisphenol A-free epoxy resin from pentaerythritol tetrarosin ester Polymer Synthesis and Polymerization
A-10-2187-2 Fabrication of phosphazene based covalent triazine polymer with excellent flame retardancy and smoke suppression for thermoplastic polyurethane Polymer Synthesis and Polymerization
A-10-2095-1 Effect of Polymerization Techniques and Reaction Temperature on Glass Transition Temperature (Tg) of Poly(methyl methacrylate) (PMMA) Polymer Synthesis and Polymerization
A-10-2404-1 Synthesis and characterization of florinated waterborne epoxy dispersion Polymer Synthesis and Polymerization
A-10-2068-1 Synthesis of pH sensitive DMAEMA-co-HEMA for drug delivery application Polymer Synthesis and Polymerization
A-10-2285-1 Phase morphology, thermophysical and mechanical properties of PCL and PDMS based two soft segments TPU Polymer Synthesis and Polymerization
A-10-2226-1 Synthesis and characterization of fluorescent polyurethane Polymer Synthesis and Polymerization
A-10-2322-1 Synthesis of Janus Nanoparticles Based on Methylmathacrylate/Methacrylamide Copolymer by Emulsion Polymerization: Ivestigation of Size and Morphology Polymer Synthesis and Polymerization
A-10-2317-1 Synthesis of PMMA Latex Nanoparticles Containing Different Functional Groups by Emulsion Polymerization for Development of Photoswitchable Spiropyran Polymer Nanoparticles Polymer Synthesis and Polymerization
A-10-2345-1 Synthesis and characterization of nanocomposites based on thermoplastic polyurethane/cellulose nanocrystals Polymer Synthesis and Polymerization
A-10-2364-2 Fe3O4 Nanoparticles grafted on microcrystalline cellulose/immidazolium-based ionic liquid: Efficient nanodemulsifire for separation of water in crude oil emulsion Polymer Synthesis and Polymerization
A-10-2370-1 Structure-Properties Comparison of Random and Block  Hydroxyl Terminated Polyether Copolymer (HTPE and TPEG) Polymer Synthesis and Polymerization
A-10-2237-2 Preparation and investigation of poly (styrene-co-butyl acrylate) composite particle size and color properties by suspension polymerization Polymer Synthesis and Polymerization
A-10-2305-1 Synthesis and properties of poly(styrene-co-butyl acrylate)/ clay nanocomposite prepared by latex componding method Polymer Synthesis and Polymerization
A-10-2080-3 Comparison of HDPE films from Basel and Mitsui slurry plants Polymer Synthesis and Polymerization
A-10-2080-4 Gel origin in the 7000F type HDPE films Polymer Synthesis and Polymerization
A-10-2194-1 Investigation of  APTMS Effect on the Mechanical Properties of Waterborne Polyurethanes based on Castor Oil Polymer Synthesis and Polymerization
A-10-2403-1 Synthesis of amphiphilic diblock copolymer PEG-b-PMMA by atom transfer radical polymerization and investigation of its surface properties Polymer Synthesis and Polymerization
A-10-2094-1 Designing a polyurethane based on PPG and MDI capable to participate in free radical polymerization Polymer Synthesis and Polymerization
A-10-2375-1 Synthesis of polyvinylidene fluoride/polythiophene as gel polymer electrolytes for lithium-ion batteries Polymer Synthesis and Polymerization
A-10-2356-1 Green synthesis of Titanium(IV) oxide with Covalent organic frameworks hybrid under ultrasonic irradiation Polymer Synthesis and Polymerization
A-10-2411-1 Synthesis and identification of porous organic polymer based on triazine and its application in Volatile iodine adsorption Polymer Synthesis and Polymerization
A-10-2308-1 Preparation of spherical micelles from diblock terpolymer based on poly(acrylic acid) in organic solvent Polymer Synthesis and Polymerization
A-10-2079-3 Novel poly(amide-urethane)s for high thermal stability applications Polymer Synthesis and Polymerization
A-10-2377-1 Polypyrrole nanoparticles synthesized in a Continuous Microfluidic Reactor Polymer Synthesis and Polymerization
A-10-2389-3 Ionomer containing methacrylate double bond pendant groups: synthesis  and characterization Polymer Synthesis and Polymerization
A-10-2389-4 Poly(acrylic acid-co-itaconic acid) based antiscalant: synthesis and properties Polymer Synthesis and Polymerization
A-10-2135-2 Effect of hydrophobic monomer type on the rheological properties of the hydrophobically modified polyacrylamides synthesized via micellar polymerization Polymer Synthesis and Polymerization
A-10-2114-3 Characterization of conventional grade polyisobutene for viscosity improver applications Polymer Synthesis and Polymerization
A-10-2465-1 Evaluation the influence of polyether/polyester mixed soft segments on Hydrogen bonding and micro-phase separation of thermoplastic polyurethanes Polymer Synthesis and Polymerization
A-10-2466-1 Synthesis of Star-shaped polycaprolactone using Glycerol as initiator Polymer Synthesis and Polymerization
A-10-2462-1 The Effect of Polymerization Temperature of Ultra High Molecular Weight Polyethylene (UHMWPE) on Microstructure Polymer Synthesis and Polymerization
A-10-2479-1 Reflectance and photophysical properties of rhodamine 6G (Rh 6G)/2-(4-methyl-2-oxo-2H-chromen-7-yloxy) acetic acid (MOHCYAA) hybrid for application in cold dye Polymer Synthesis and Polymerization
A-10-2479-2 Poly (acrylamide-co-(7-(Allyloxy)-2H-chromen-2-one) and poly (acrylamide-co-N-(Rhodamine-6G) lactam-N-Allyloxy ethylenediamine)-derived Fe3+ selective fluorescent sensor in aqueous media Polymer Synthesis and Polymerization
A-10-2508-2 High-performance comb-like PCE Superplasticizer and their interactions with cement particles Polymer Synthesis and Polymerization
A-10-2485-1 Synthesis and identification of a porous organic polymer and its application for adsorption of anionic dyes Polymer Synthesis and Polymerization
A-10-2466-2 Synthesis of star-shaped polyurethane using polycaprolactone with three arms and investigation of its shape memory performance Polymer Synthesis and Polymerization
A-10-2366-2 Nano Porous Polymer Beads Based on Cross-linked Poly(styrene -co-butylacrylate) Prepared through Suspension Polymerization for Extraction of Anthocyanin Polymer Synthesis and Polymerization
A-10-2172-3 Synthesis and characterization of hydrogel nanocomposite polyacrylamide /halloysite nanotubes /chitosan for wound dressing Polymer Synthesis and Polymerization
A-10-2055-2 Synthesis of sulfonated polyaniline composite on the surface of pencil graphite electrode and its application in ammonium detection Polymer Synthesis and Polymerization
A-10-2502-1 Study on characteristics and properties of chitosan-based polymer electrolytes Polymer Synthesis and Polymerization
A-10-2524-1 κ-Carrageenan/triazin-based covalent organic framework nanocomposite: preparation, characterization, and application in BB41 dye removal Polymer Synthesis and Polymerization
A-10-2492-5 Investigation of electrocatalytic properties of Cu-pPDA Coordination Polymer in CO2 RR Polymer Synthesis and Polymerization
A-10-2504-1 Synthesis, Characterization and Polymerization of HEMA on Fe3O4 Nanoparticles via SI-ATRP Polymer Synthesis and Polymerization
A-10-2510-1 Long-chain branched random poly (butylene adipate-co-ethylene terephthalate) tetrapolymers: synthesis and rheological properties Polymer Synthesis and Polymerization
A-10-2504-3 Synthesis of Graphene OxideMill 101(Cr) composite to investigate the absorption of pollution from industrial effluents Polymer Synthesis and Polymerization
A-10-2403-3 Synthesis of Poly(ethylene glycol)-b-Polystyrene Microbubbles Polymer Synthesis and Polymerization
A-10-2521-1 Synthesis of imidazolium based triazol poly(ionic liquids) by atom transfer radical polymerization (ATRP) in the presence of green macroinitiator to demulsification of W/O emulsion Polymer Synthesis and Polymerization
A-10-2533-1 Synthesis and Characterization of Biodegradable Anti-Bacterial Polyurethane Coatings in Deep Eutectic Solvents Polymer Synthesis and Polymerization
A-10-2419-2 Density and Thermal Conductivity Study of Rigid Polyurethane Foams using RSM Polymer Synthesis and Polymerization
A-10-2567-1 Synthesis of MOF525Pani composite as absorbent of organic dies Polymer Synthesis and Polymerization
A-10-2464-1 Traceable Smart Hydrogel with High Capacity for Efficient Drug Administration Polymer Synthesis and Polymerization
A-10-2055-3 Synthesis of sulfonated polyaniline composite on the surface of pencil graphite electrode and its application in dopamine detection Polymer Synthesis and Polymerization
A-10-2597-1 Synthesis of Hydroxyl-Terminated Polyether (HTPE) by Innovative Approach Using The Williamson Method Polymer Synthesis and Polymerization
A-10-2604-1 Fabrication of a novel polyol from sunflower oil for synthesis of antibacterial polyurethane coating Polymer Synthesis and Polymerization
A-10-2611-1 graft copolymerization of Lignin-Polycaprolactone(PCL) and evaluation of its structural characteristics Polymer Synthesis and Polymerization
A-10-2543-1 Synthesis of sulfonated polyaniline-nylon6 nanoblend Polymer Synthesis and Polymerization
A-10-2348-2 Simulation  of  bulk  photopolymerization  of  furfuryl  acrylate Polymer Synthesis and Polymerization
A-10-2619-1 Synthesis and charectrization unsaturated random copolyether-ester and investigation their curing mechanism using rheology Polymer Synthesis and Polymerization
A-10-2278-3 Effect of the percentage of sulfonation monomer in hydrophilicity of sulfonated poly (arylene ether sulfone) water treatment membranes Polymer Synthesis and Polymerization
A-10-2647-1 Synthesis and characterization of Modified polyisobutylene-based oil-soluble dispersants from Polyisobutylene Succinimides Polymer Synthesis and Polymerization
A-10-2660-1 Synthesis of poly (propylene imine) dendrimer with ethylenediamine core and investigation of dendrimer's response to glucose at different pH Polymer Synthesis and Polymerization
A-10-2725-1 Investigating the Progress of Polymerization of Bismaleimide Using Mark-Houwink-Sakurada Equation Polymer Synthesis and Polymerization
A-10-2728-1 Synthesis and characterization of a novel conductive copolymer based on imidazole derivative compound and aniline Polymer Synthesis and Polymerization
A-10-2613-2 Temperature responsive PS-b-PNIPAM grafted substrates developed by surface-initiated ATRP technique Polymer Synthesis and Polymerization
A-10-2722-1 Synthesis and characterization of conductive polymers based on carbazole structure and investigation of their physical, electrochemical and sensor properties Polymer Synthesis and Polymerization
A-10-2307-2 Advances of SARS-CoV-2 Vaccine Delivery Using Supramolecular Structuring of Mesoporous Silica Nanoparticles Modified with β-Cyclodextrins Polymeric Materials for Medical Care in the COVID-19 Pandemic
A-10-2139-1 Rheological behaviors as criteria for the size of blow molded polyethylene articles Rheology and Polymer Processing
A-10-2191-1 Diluent elimination may impact the crystalline structure of the polymer in a polymer-diluent system Rheology and Polymer Processing
A-10-2191-2 Crystallization Temperature of Diluted Polymers: Dependency on Cooling Rate and Composition Rheology and Polymer Processing
A-10-2237-1 An Investigation on Mechanical and Rheological Properties of Recycled PET (r-PET) by using Toluene diisocyanate (TDI) as a chain extender Rheology and Polymer Processing
A-10-2267-1 Rheological Properties and Miscibility Studies of Blown Films Made From Recycled LDPE/LLDPE Films Rheology and Polymer Processing
A-10-2221-1 Rheologiacal Properties Investigation of Flopaam 360S Solution Regard to Temperature and Salinity Rheology and Polymer Processing
A-10-2316-2 Stydy Effect of POSS Side Pendant Group Length on  Rheological Properties of LDPE and PS Nanocomposites Rheology and Polymer Processing
A-10-2316-3 Effect of Alkyl Chain Length in Phthalate Plasticizer via Rheological Investigation of PVC Plastisol Gelation and Fusion Rheology and Polymer Processing
A-10-2116-1 Preparation of the Modified Polyethylenes Using Reactive Extrusion for Using in Packaging Industries and Investigation of their Physical and Mechanical Properties Rheology and Polymer Processing
A-10-2191-3 Molecular weight and dispersity competition to govern the crystalline features of poly(3-hexylthiophene) Rheology and Polymer Processing
A-10-2108-2 Evaluation the rheological behavior of high filled CU-ABS 3d printing filament Rheology and Polymer Processing
A-10-2536-1 Rheological study of modified starch with multifunctional citric acid Rheology and Polymer Processing
A-10-2423-2 Van Gurp-Palmen plots for blends of linear and branched polyethylenes at various temperatures Rheology and Polymer Processing
A-10-2415-1 Investigation the effect of different parameters on the size of polydimethylsiloxane particles using the microfluidic method Rheology and Polymer Processing
A-10-2501-3 The Transient Shear Flow of Viscoelastic Fluids in Concentric Annuli Rheology and Polymer Processing
A-10-2500-1 Investigation of rheological behaviors of PP and PP-PE copolymer Rheology and Polymer Processing
A-10-2500-2 A study on rheological behavior of PP/PE copolymers based on generalized maxwell model Rheology and Polymer Processing
A-10-2561-1 Chemical degradation of pipe grade polyethylene in the chlorinated water-Effect of comonomer type and distribution Rheology and Polymer Processing
A-10-2550-1 Investigation of xylene permeability as pesticides and herbicides solvent in ‎cylindrical plastic bottles  ‎ Rheology and Polymer Processing
A-10-2474-1 Investigation of Rheological Behavior of poly (lactic acid) (PLA) /HCNT Nanocomposites Rheology and Polymer Processing
A-10-2052-2 Effect of temperature on diffusion coefficient and nematic-isotropic phase transition in liquid crystalline elastomers using molecular dynamics simulation Simulation and Modeling of Polymeric System
A-10-2217-1 Modeling of Critical Properties in Bionanocomposite Hydrogels Prepared by Freeze-Thaw Method Simulation and Modeling of Polymeric System
A-10-2217-2 Application of Genetic Algorithm to Model and Interpret Mechanical Properties in Thermoplastic Starch-Based Biocomposites Reinforced by Rice Straw Simulation and Modeling of Polymeric System
A-10-2082-2 Simulations of the  X-ray shielding materials using the MCNP metod Simulation and Modeling of Polymeric System

View: 14811 Time(s)   |   Print: 1077 Time(s)   |   Email: 0 Time(s)   |   0 Comment(s)

Fri, Jun 2, 2023   |   فارسی

Seminar Poster




Approved by Ministry of Science, Research and Technology

Important Dates

  • Extended abstract submission deadline:
                  16 Aug. 2022
  • Abstract acceptance notification: 
                   Sep. 2022
  • Early registration deadline:
                   ​​22 Oct. 2022
  • Conference dates:
             ​​​​​​8-10 Nov. 2022

Newsletter subscription

Enter your email address to have site news and announcements delivered directly to your inbox.

Site Statistics

  • Registered users: 848 users
  • Online users: 0 users
  • Guest users: 5 users
  • All visits: 1362729 visits
  • Visits in 24 Hours: 148 visits

© 2017 All Rights Reserved | the 15th International Seminar on Polymer Science and Technology (ISPST2022)

Designed & Developed by : Yektaweb