Note
| Post date: 2022/06/21 |
Note:
Authors are requested to submit their Extended Abstract through the seminar website (http://www.ispst.ir) before submission deadline (23 July. 2022).
After accepting the article, you will be informed about the next steps.
Presented Oral
Authors are requested to submit their Extended Abstract through the seminar website (http://www.ispst.ir) before submission deadline (23 July. 2022).
After accepting the article, you will be informed about the next steps.
Presented Oral
A-10-2162-1 | A novel epoxy/MXene nanocomposite adhesive in aluminum-aluminum bonded joints:Mechanical properties and lap shear strength | Adhesives, Paints and Coatings |
A-10-2357-2 | Synthesis of Hybrid Graphene-Based Filler as a Promising Filler to Alter the Hydrophobicity/Hydrophilicity of the Polymeric Coatings | Adhesives, Paints and Coatings |
A-10-2334-1 | Evaluation of Surface Energy for CPP Film Using the Lifshitz-van der Waals/ Acide-Base Method | Adhesives, Paints and Coatings |
A-10-2094-3 | Effect of silanized polyurethane content on adhesion properties of a polyurethane-acrylic hybrid adhesive | Adhesives, Paints and Coatings |
A-10-2563-1 | Viscoelastic Properties of a Zinc Oxide-Filled Acrylate Pressure Sensitive Adhesive | Adhesives, Paints and Coatings |
A-10-2595-1 | Evaluation of peel strength of a polyurethane/acrylic pressure-sensitive adhesive | Adhesives, Paints and Coatings |
A-10-2563-2 | Zinc Oxide-Filled, Acrylate Pressure Sensitive Adhesive: Adhesion and Antibacterial Evaluations | Adhesives, Paints and Coatings |
A-10-2453-2 | Passenger Tire Tread Formulation Based On Silica/Carbon Black Hybrid Reinforcement System | Elastomers and Compounding Technologies |
A-10-2041-1 | Novel graphene oxide semi-IPN nanocomposite hydrogel based on partially hydrolyzed polyacrylamide: preparation, swelling properties and adsorption studies of cationic methylene blue dye from water | Fibers, Films and Polymeric Membranes |
A-10-2276-1 | Fabrication and characterization of L-Asparagine monohydrate functionalized-TiO2/PES nanofiltration membrane with enhanced antifouling properties in removal of dye pollution from water | Fibers, Films and Polymeric Membranes |
A-10-2278-2 | Synthesis and characterization of novel poly(sulfone urethane) based on urethane diol oligomer for membrane desalination | Fibers, Films and Polymeric Membranes |
A-10-2079-1 | Synthesis, characterization, and membrane desalination application of a novel poly(sulfone sulfide) | Fibers, Films and Polymeric Membranes |
A-10-2079-2 | Synthesis and characterization of novel high performance poly(sulfone-amid) alternative copolymers for water desalination membranes | Fibers, Films and Polymeric Membranes |
A-10-2410-2 | Preparation of PVDF-HFP Gel Polymer Electrolytes with Honey Comb-Like Morphology Structure for Lithium-Ion Battery Application | Fibers, Films and Polymeric Membranes |
A-10-2509-1 | surface modification of silica nano particles by graft polymerization of acrylamide and effect of the particles on the gas separation properties of Pebax membrane | Fibers, Films and Polymeric Membranes |
A-10-2248-1 | Synthesis and optimized electrospinning of oxidized carboxymethyl cellulose | Fibers, Films and Polymeric Membranes |
A-10-2124-1 | beaded superabsorbent hydrogels based on starch_g_poly(acrylic acid) assisted by cellulose nanofibers for cu ions removal | Green and Environmentally Sustainable Biopolymers |
A-10-2186-1 | Green Synthesis and characterization of micronization Polylactide foam (lactirofoam) | Green and Environmentally Sustainable Biopolymers |
A-10-2209-1 | Quaternary ammonium containing polyhydroxyurethane-graft-poly(ε-caprolactone) nanofibers as an antibacterial wound dressing | Green and Environmentally Sustainable Biopolymers |
A-10-2209-2 | Hybrid Non-isocyanate polyurethane surface modified by gelatin as a wound dressing membrane | Green and Environmentally Sustainable Biopolymers |
A-10-2277-2 | Investigation of Thermal Behavior of Bulk-Aminolyzed PLA with PAMAM | Green and Environmentally Sustainable Biopolymers |
A-10-2351-2 | Investigating the effects of non-clay on polymeric edible coating based on psyllium mucilage | Green and Environmentally Sustainable Biopolymers |
A-10-2107-2 | Barrier properties of PLA/PBAT/Nanoclay Bionanocomposite films for food packaging | Green and Environmentally Sustainable Biopolymers |
A-10-2489-1 | Immobilization of Laccase Nanoflower in Polydopamine Biofilm for Biocathode Formation and Its Integration with Glucose Dehydrogenase Bioanode in a Membrane-free of Glucose/O2 Biofuel Cell | Green and Environmentally Sustainable Biopolymers |
A-10-2209-3 | Preparation and evaluation of antibacterial PVA/Gelatin/NIPU wound dressing membranes containing Guanidine hydrochloride moieties | Green and Environmentally Sustainable Biopolymers |
A-10-2320-1 | Preparation and properties of biodegradable nanocomposite foams based on PLA/PBAT/Nanoclay | Green and Environmentally Sustainable Biopolymers |
A-10-2360-2 | Extraction of cellulose nanofibers from paper pulp using mechanical-chemical method | Green and Environmentally Sustainable Biopolymers |
A-10-2330-3 | Oxidized lignin cross-linked O-carboxymethyl chitosan /aminosilane modified LDH for enhanced tetracycline removal | Green and Environmentally Sustainable Biopolymers |
A-10-2277-3 | Four different methods of acrylic acid grafting on PLA nonwoven for further layer-by-layer modification | Green and Environmentally Sustainable Biopolymers |
A-10-2559-1 | Analyzing the Swelling Behavior of Persian Gum-g-Polyvinyl Acetate Film Using Ternary Interaction Parameter | Green and Environmentally Sustainable Biopolymers |
A-10-2566-1 | Effect of Nano-clay incorporation on the mechanical properties of nanocomposite IPNs based on GelMA/Alginate/Nano-clay | Green and Environmentally Sustainable Biopolymers |
A-10-2570-1 | Printability of GelMA/Alginate IPN reinforced by COF for tissue engineering application | Green and Environmentally Sustainable Biopolymers |
A-10-2347-1 | Synthesis of reactive core-shell particles and their use in toughening of poly(lactic acid) | Green and Environmentally Sustainable Biopolymers |
A-10-2559-2 | Effect of Oxidant Concentration on Intrinsic Viscosity and Swelling Behavior of a Chemically Modified Persain Gum (PG) in Water | Green and Environmentally Sustainable Biopolymers |
A-10-2346-1 | Preparation and charecterisation of PLA/PBAT/pMDI blends suitable for food packaging | Green and Environmentally Sustainable Biopolymers |
A-10-2641-1 | Green starch composite films reinforced bysecond-generation bioethanol production byproduct | Green and Environmentally Sustainable Biopolymers |
A-10-2058-1 | Stabilizing Organized Surface Structures in Casting Solutions of Ionic Block Copolymer Membranes | Nano-structured Polymers and Smart Systems |
A-10-2265-1 | Preparation of thermochromic polymer based on rhodamine B for development of anticounterfeiting inks | Nano-structured Polymers and Smart Systems |
A-10-2322-2 | Post-Polymerization Modification of Amide Functionalized Copolymer Nanaoparticles with Oxazolidine for Advanced Anticounterfeitng and Information Encryption | Nano-structured Polymers and Smart Systems |
A-10-2379-1 | Preparation of light-responsive nanofibrous polymers | Nano-structured Polymers and Smart Systems |
A-10-2335-2 | The Effect of Acrylic Based Ionomer Gel Microstructure and Electrolyte Type on the Volume Conductivity of Assembled Battery Separator | Nano-structured Polymers and Smart Systems |
A-10-2335-3 | Mono-size Polyisocynate nanoparticles as the interfacial crosslinker of WPU/Acrylic core-shell latexes to adhesively bond laminates | Nano-structured Polymers and Smart Systems |
A-10-2483-1 | Fluorescent Polymer Nanoparticles as High-Security Anti-counterfeiting Ink | Nano-structured Polymers and Smart Systems |
A-10-2394-1 | Visualization of Latent Fingerprints by Powder Dusting of Spiropyran Copolymer Nanoparticles | Nano-structured Polymers and Smart Systems |
A-10-2065-1 | An Environmentally Friendly Adsorbent Aerogel with Outstanding Mechanical Performance | Polymer Blends, Composites and Nano-composites |
A-10-2125-1 | Preparation and characterization of hybrid organic-inorganic nanoparticle/PVDF blends | Polymer Blends, Composites and Nano-composites |
A-10-2231-1 | Preparation and properties of co-continuous PC/PET/MWCNT/GNP engineering polymer blend nanocomposites | Polymer Blends, Composites and Nano-composites |
A-10-2232-1 | Investigating the effect of extruder die temperature on rheology-morphology relationship in polypropylene/polyethylene terephthalate blend | Polymer Blends, Composites and Nano-composites |
A-10-2024-1 | Significant enhancement of Thermal conductivity in epoxy filled ceramic fillers | Polymer Blends, Composites and Nano-composites |
A-10-2291-1 | Effect of Initial Silica Content on the Phase Composition, Morphology, and Thermal Oxidation Kinetic of Novolac-based Carbon Aerogel Composites | Polymer Blends, Composites and Nano-composites |
A-10-2299-1 | Preparation of paraffin/CNT/PP aerogel composite as a new phase change material | Polymer Blends, Composites and Nano-composites |
A-10-2399-1 | Mechanical and rheological properties of Poly Lactic Acid (PLA) and Poly Butylene Succinate (PBS) nanocomposites incorporating cellulose nanocrystals | Polymer Blends, Composites and Nano-composites |
A-10-2159-3 | Calendering Process of Bio-based Kenaf/Low Density Polyethylene Composites Sheets | Polymer Blends, Composites and Nano-composites |
A-10-2642-1 | Conduction mechanism and dielectric properties of PP/EVA/MWCNTs nanocomposites in the presence of PP-g-MA comatiblizer | Polymer Blends, Composites and Nano-composites |
A-10-2565-1 | Effect of Modified Carbon Fiber on Shape Stability and Leakage Reduction of Phase Change Systems Based on Polyethyene Glycol | Polymer Blends, Composites and Nano-composites |
A-10-2637-1 | Morphological and rheological investigation of PP/PC/SBS/Clay nanocomposites | Polymer Blends, Composites and Nano-composites |
A-10-2594-1 | Polystyrene/Poly(lactic acid) Janus particles prepared by emulsion solvent evaporation method | Polymer Blends, Composites and Nano-composites |
A-10-2730-1 | The Effect of Wood Content and layer thickness on Tensile Properties of Wood Flour/ PLA Composites Fabricated by FDM | Polymer Blends, Composites and Nano-composites |
A-10-2093-1 | Antibacterial Nanobiocomposite Hydrogels Based on Polyphenolic Nanosheets Decorated with Ionic Liquid for Tissue Engineering | Polymer in Biomedical and Tissue Engineering |
A-10-2128-1 | Poly(ionic liquid) based Antibacterial Hydrogels for Wound Healing | Polymer in Biomedical and Tissue Engineering |
A-10-2047-2 | Investigating the influence of UHMWPE fibers as a toughening agent for PMMA in denture base | Polymer in Biomedical and Tissue Engineering |
A-10-2087-1 | Fabrication of PLGA microcarriers with oxygen release capability for bone tissue engineering | Polymer in Biomedical and Tissue Engineering |
A-10-2204-2 | Investigation of polymerization temperature profile of PMMA bone cement/nano-silica composite by infrared thermography | Polymer in Biomedical and Tissue Engineering |
A-10-2071-1 | The effect of hydroxypropyl cellulose presence on the morphology and physical properties of polyvinyl alcohol nanofibers | Polymer in Biomedical and Tissue Engineering |
A-10-2569-1 | Effect of modified graphene oxide nano-plate on mechanical properties of GelMA nanocomposite in tissue engineering | Polymer in Biomedical and Tissue Engineering |
A-10-2359-2 | Fabrication of gelatin/ poly (vinyl alcohol)/ carboxymethyl cellulose composite nanofibrous sponge for hemostatic application | Polymer in Biomedical and Tissue Engineering |
A-10-2309-1 | Preparation of poly(L-lactic acid)/gelatin co-electrospun nanofibers as potential products for biomedical applications | Polymer in Biomedical and Tissue Engineering |
A-10-2490-2 | Investigation of the effect of chitosan on polyurethane bioadhesive based on castor oil | Polymer in Biomedical and Tissue Engineering |
A-10-2292-1 | Granular Hydrogels Composed of Modified Jammed Microgels For 3D Printing Applications | Polymer in Biomedical and Tissue Engineering |
A-10-2516-1 | Fabrication of nanofibrous Piezoactive bioscaffold based on PVDF-GO/PLLA nanocomposite by hybrid electrospinning method | Polymer in Biomedical and Tissue Engineering |
A-10-2558-1 | Introducing a nanocomposite transdermal patch: Adhesion and ketoprofen release | Polymer in Biomedical and Tissue Engineering |
A-10-2464-2 | Mimicking Mechanical Behavior of Human Tissue with 3D Printable Elastomeric Hydrogel | Polymer in Biomedical and Tissue Engineering |
A-10-2573-1 | Click for bioprinting: Development of autonomous curable bioinks based on Diels-Alder click chemistry | Polymer in Biomedical and Tissue Engineering |
A-10-2421-1 | Three Dimensionally Culture of Sheep Preantral Follicles in a Thiolated Hyaluronic Acid Hydrogel | Polymer in Biomedical and Tissue Engineering |
A-10-2102-1 | Fabrication and characterization of 3D bio-printed electroconductive hydrogel scaffold based on Alginate and its application in cardiac tissue engineering | Polymer in Biomedical and Tissue Engineering |
A-10-2400-1 | A Promising Success in the Full Regeneration of Critical-Size Bone Defects | Polymer in Biomedical and Tissue Engineering |
A-10-2606-1 | Rheological study of alginate-gelatin hydrogel for tissue engineering bioprinting | Polymer in Biomedical and Tissue Engineering |
A-10-2273-2 | The effect of the presence of Chondroitin sulfate on porosity and mechanical properties of enzymatically cross linked silk fibroin/ chondroitin sulfate hydrogel | Polymer in Biomedical and Tissue Engineering |
A-10-2639-1 | Interpenetrated network hydrogel based on GelMA/ alginate and nano SiO2 | Polymer in Biomedical and Tissue Engineering |
A-10-2132-1 | Control of hydrogen response for Polypropylene Obtained by Ziegler-Natta Catalyst: Effect of External Donor | Polymer Synthesis and Polymerization |
A-10-2220-1 | Supercooling suppression of microencapsulated phase change materials (mPCMs) with melamine formaldehyde shell by adding nucleating agent into the core material prior to encapsulation | Polymer Synthesis and Polymerization |
A-10-2105-1 | Enhanced CO2 capture on nitrogen-doped porous carbon materials derived from phenolic resins based on deep eutectic solvent precursor | Polymer Synthesis and Polymerization |
A-10-2254-1 | Preparation and characterization of photochromic polymer nanoparticles for the development of highly efficient anticounterfeiting nanoinks | Polymer Synthesis and Polymerization |
A-10-2074-1 | Synthesis of nanocellulose functionalized with pH-sensitive polymer to remove methylene blue from wastewater | Polymer Synthesis and Polymerization |
A-10-2258-1 | Preparation of core–shell acrylonitrile-styrene-acrylate impact modifier particles through seeded emulsion polymerization | Polymer Synthesis and Polymerization |
A-10-2286-2 | Synthesis of Water-Soluble Sulfonated Polyaniline (SPANI) and Investigation of Its Effect on the Short-Circuit Current in the Perovskite Solar Cells | Polymer Synthesis and Polymerization |
A-10-2076-2 | Surface Engineering of Reduced Graphene Oxide by Grafting Poly(butyl acrylate) chains for Use in Dielectric Polymer Nano-Composites | Polymer Synthesis and Polymerization |
A-10-2369-1 | Preparation of Polystyrene Microparticles by on-chip UV-Polymerization through Microfluidic Channels | Polymer Synthesis and Polymerization |
A-10-2318-1 | Experimental Investigation on Morphological Characteristics and Stability of Poly(vinyl chloride) Microspheres by Microsuspension Polymerization | Polymer Synthesis and Polymerization |
A-10-2407-1 | Cellulose-based recyclable polymer electrolytes | Polymer Synthesis and Polymerization |
A-10-2403-2 | Investigation of effective parameters on cloud point of poly(acrylamide-co-acrylonitrile) in aqueous solutions | Polymer Synthesis and Polymerization |
A-10-2566-2 | Synthesising Iron Oxide![]() ![]() |
Polymer Synthesis and Polymerization |
A-10-2419-1 | Polyurethane Rigid Foam Synthesis Using Response Surface Methodology(RSM); Morphological Study | Polymer Synthesis and Polymerization |
A-10-2398-1 | Synthesis and characterization of poly(aniline-co-carbazole)![]() |
Polymer Synthesis and Polymerization |
A-10-2492-3 | Synthesis and characterization of 2D layered Cu-pPDA coordination polymer | Polymer Synthesis and Polymerization |
A-10-2530-1 | Synthesis of imidazolium-based polymeric ionic liquid as supercapacitor active material | Polymer Synthesis and Polymerization |
A-10-2538-1 | Stimuli-Responsive PAMAM Dendritic Macromolecules for Optical Detection of Food Spoilage | Polymer Synthesis and Polymerization |
A-10-2562-1 | Water absorption and thermal stability of waterborne polyurethaneacrylate/nanoclay films | Polymer Synthesis and Polymerization |
A-10-2592-1 | Synthesis of novel triazole-based poly vinyl imidazolium Ionic liquid for demulsification of water in crude oil emulsions | Polymer Synthesis and Polymerization |
A-10-2593-1 | Kinetic study of Butyl Acrylate Solution Polymerization at High Temperature | Polymer Synthesis and Polymerization |
A-10-2508-3 | Titanium-Silasequioxane Coordination Compound as a Heterogeneous, Thermally Stable Catalyst: Synthesis and Characterization | Polymer Synthesis and Polymerization |
A-10-2572-1 | Ethylene-Propylene copolymerization using Et(Ind)2ZrCl2 metallocene catalyst: Synthesis and Microstructure Analysis | Polymer Synthesis and Polymerization |
A-10-2039-2 | Monitoring the effect of initiator, stabilizer, and water/alcohol medium on the conversion of synthesized polystyrene by dispersion polymerization method by Design Expert software | Polymer Synthesis and Polymerization |
A-10-2084-1 | Electrospinning of Polyhydroxybutyrate/Lignin/Cellulose-nanofibers Bio-nanocomposite Scaffold for Bone Tissue Engineering Application | Polymeric Materials for Medical Care in the COVID-19 Pandemic |
A-10-2241-1 | The potential of PIM-1/nano silver air separation membranes application in the production of the face masks in the COVID-19 pandemic | Polymeric Materials for Medical Care in the COVID-19 Pandemic |
A-10-2066-4 | Rheological behavior of poly(lactic acid)/ silicon rubber/ Silicon Modified Graphene Oxide | Rheology and Polymer Processing |
A-10-2257-2 | Pitch Mesophase Common Rheological Behaviors | Rheology and Polymer Processing |
A-10-2030-1 | The solid state rheological investigation of core-shell impact modifier nanoparticles efficacy: 3-D networking | Rheology and Polymer Processing |
A-10-2352-1 | The rheological characterization of different concentrations of bacteria in the polymer solution | Rheology and Polymer Processing |
A-10-2481-1 | Modification of Polypropylene-graft-Maleic Anhydride with Epoxy by Reactive Extrusion for Preparation of High-Melt-Strength Polypropylene | Rheology and Polymer Processing |
A-10-2501-1 | Studying Rheology of the FENE-P Chains Using a Micro-Macro Approach | Rheology and Polymer Processing |
A-10-2564-1 | Influence of molecular weight, molecular weight distribution, random and impact co-polymerization on the rheological behavior of polypropylene | Rheology and Polymer Processing |
A-10-2539-2 | Chemorheological Characterization of HTPB Based Polyurethane Formulations Containing Different Chain Extender Contents | Rheology and Polymer Processing |
A-10-2263-1 | Simulation of Rubber Hose Curing | Simulation and Modeling of Polymeric System |
A-10-2219-1 | The Abnormal Analysis of Number Average Molecular Weight of Sulfonated Melamine Formaldehyde (SMF) | Simulation and Modeling of Polymeric System |
A-10-2138-1 | New Protocol For Modeling of Thermal Degradation Kinetics of Epoxy Nanocomposites | Simulation and Modeling of Polymeric System |
A-10-2257-1 | Modeling and Temperature Control of Isocyanate-Water Side Reactions | Simulation and Modeling of Polymeric System |
A-10-2453-1 | Multiscale Modeling Approach to Predict the Mechanical Behavior of elastomer nanocomposites | Simulation and Modeling of Polymeric System |
A-10-2336-1 | The Effect of Bulk Acoustic Waves on Glass Bead Dispersion Inside The 3D Prinint Resin Materials | Simulation and Modeling of Polymeric System |
A-10-2525-1 | A novel approach for synthesis of zwitterionic polyurethane coatings through molecular dynamics simulation study | Simulation and Modeling of Polymeric System |
A-10-2510-2 | Space State Temperature Control of poly(butylene succinate) esterification reactions | Simulation and Modeling of Polymeric System |
A-10-2659-1 | Numerical Study on The Effect of The viscosity on The Pinch-Off Behavior of The Droplet in Drop Formation Process | Simulation and Modeling of Polymeric System |
A-10-2662-1 | The Origin of Charge Transport Synergism in the Hybrid of Geometrically Anisotropic and Conductive Nanoparticles: A Monte Carlo Simulation Study | Simulation and Modeling of Polymeric System |
A-10-2418-2 | Oxygen permeation rate through PBAT: a molecular dynamics simulation | Simulation and Modeling of Polymeric System |
View: 1065 Time(s) | Print: 70 Time(s) | Email: 0 Time(s) |
0 Comment(s)
Fri, Jun 2, 2023
| فارسی
Important Dates
- Extended abstract submission deadline:
16 Aug. 2022
- Abstract acceptance notification:
Sep. 2022
- Early registration deadline:
22 Oct. 2022
- Conference dates:
8-10 Nov. 2022
Newsletter subscription
Enter your email address to have site news and announcements delivered directly to your inbox.
Site Statistics
- Registered users: 848 users
- Online users: 0 users
- Guest users: 14 users
- All visits: 1362788 visits
- Visits in 24 Hours: 186 visits