the 15th International Seminar on Polymer Science and Technology (ISPST2022)- Oral
Note

Clear images and colors  | Post date: 2022/06/21 | 
Note:
Authors are requested to submit their Extended Abstract through the seminar website (http://www.ispst.ir) before submission deadline (23 July. 2022).
After accepting the article, you will be informed about the next steps.

Presented Oral
A-10-2162-1 A novel epoxy/MXene nanocomposite  adhesive in aluminum-aluminum bonded joints:Mechanical properties and lap shear strength Adhesives, Paints and Coatings
A-10-2357-2 Synthesis of Hybrid Graphene-Based Filler as a Promising Filler to Alter the Hydrophobicity/Hydrophilicity of the Polymeric Coatings Adhesives, Paints and Coatings
A-10-2334-1 Evaluation of Surface Energy for CPP Film Using the Lifshitz-van der Waals/ Acide-Base Method Adhesives, Paints and Coatings
A-10-2094-3 Effect of silanized polyurethane content on adhesion properties of a polyurethane-acrylic hybrid adhesive Adhesives, Paints and Coatings
A-10-2563-1 Viscoelastic Properties of a Zinc Oxide-Filled Acrylate Pressure Sensitive Adhesive Adhesives, Paints and Coatings
A-10-2595-1 Evaluation of peel strength of a polyurethane/acrylic pressure-sensitive adhesive Adhesives, Paints and Coatings
A-10-2563-2 Zinc Oxide-Filled, Acrylate Pressure Sensitive Adhesive: Adhesion and Antibacterial Evaluations Adhesives, Paints and Coatings
A-10-2453-2 Passenger Tire Tread Formulation Based On Silica/Carbon Black Hybrid Reinforcement System Elastomers and Compounding Technologies
A-10-2041-1 Novel graphene oxide semi-IPN nanocomposite hydrogel based on partially hydrolyzed polyacrylamide: preparation, swelling properties and adsorption studies of cationic methylene blue dye from water Fibers, Films and Polymeric Membranes
A-10-2276-1 Fabrication and characterization of L-Asparagine monohydrate functionalized-TiO2/PES nanofiltration membrane with enhanced antifouling properties in removal of dye pollution from water Fibers, Films and Polymeric Membranes
A-10-2278-2 Synthesis and characterization of novel poly(sulfone urethane) based on urethane diol oligomer for membrane desalination Fibers, Films and Polymeric Membranes
A-10-2079-1 Synthesis, characterization, and membrane desalination application of a novel poly(sulfone sulfide) Fibers, Films and Polymeric Membranes
A-10-2079-2 Synthesis and characterization of novel high performance poly(sulfone-amid) alternative copolymers for water desalination membranes Fibers, Films and Polymeric Membranes
A-10-2410-2 Preparation of PVDF-HFP Gel Polymer Electrolytes with Honey Comb-Like Morphology Structure for Lithium-Ion Battery Application Fibers, Films and Polymeric Membranes
A-10-2509-1 surface modification of silica nano particles by graft polymerization of acrylamide and effect of the particles on the gas separation properties of Pebax membrane Fibers, Films and Polymeric Membranes
A-10-2248-1 Synthesis and optimized electrospinning of oxidized carboxymethyl cellulose Fibers, Films and Polymeric Membranes
A-10-2124-1 beaded superabsorbent hydrogels based on starch_g_poly(acrylic acid) assisted by cellulose nanofibers for cu ions removal Green and Environmentally Sustainable Biopolymers
A-10-2186-1 Green Synthesis and characterization of micronization Polylactide foam (lactirofoam) Green and Environmentally Sustainable Biopolymers
A-10-2209-1 Quaternary ammonium containing polyhydroxyurethane-graft-poly(ε-caprolactone) nanofibers as an antibacterial wound dressing Green and Environmentally Sustainable Biopolymers
A-10-2209-2 Hybrid Non-isocyanate polyurethane surface modified by gelatin as a wound dressing membrane Green and Environmentally Sustainable Biopolymers
A-10-2277-2 Investigation of Thermal Behavior of Bulk-Aminolyzed PLA with  PAMAM Green and Environmentally Sustainable Biopolymers
A-10-2351-2 Investigating the effects of non-clay on polymeric edible coating based on psyllium mucilage Green and Environmentally Sustainable Biopolymers
A-10-2107-2 Barrier properties of PLA/PBAT/Nanoclay Bionanocomposite films for food packaging Green and Environmentally Sustainable Biopolymers
A-10-2489-1 Immobilization of Laccase Nanoflower in Polydopamine Biofilm for Biocathode Formation and Its Integration with Glucose Dehydrogenase Bioanode in a Membrane-free of Glucose/O2 Biofuel Cell Green and Environmentally Sustainable Biopolymers
A-10-2209-3 Preparation and evaluation of antibacterial PVA/Gelatin/NIPU wound dressing membranes containing Guanidine hydrochloride moieties Green and Environmentally Sustainable Biopolymers
A-10-2320-1 Preparation and properties of biodegradable nanocomposite foams based on PLA/PBAT/Nanoclay Green and Environmentally Sustainable Biopolymers
A-10-2360-2 Extraction of cellulose nanofibers from paper pulp using mechanical-chemical method Green and Environmentally Sustainable Biopolymers
A-10-2330-3 Oxidized lignin cross-linked O-carboxymethyl chitosan /aminosilane modified LDH for enhanced tetracycline removal Green and Environmentally Sustainable Biopolymers
A-10-2277-3 Four different methods of acrylic acid grafting on PLA nonwoven for further layer-by-layer modification Green and Environmentally Sustainable Biopolymers
A-10-2559-1 Analyzing the Swelling Behavior of Persian Gum-g-Polyvinyl Acetate Film Using Ternary Interaction Parameter Green and Environmentally Sustainable Biopolymers
A-10-2566-1 Effect of Nano-clay incorporation on the mechanical properties of nanocomposite IPNs based on GelMA/Alginate/Nano-clay Green and Environmentally Sustainable Biopolymers
A-10-2570-1 Printability of GelMA/Alginate IPN reinforced by COF for tissue engineering application Green and Environmentally Sustainable Biopolymers
A-10-2347-1 Synthesis of reactive core-shell particles and their use in toughening of poly(lactic acid) Green and Environmentally Sustainable Biopolymers
A-10-2559-2 Effect of Oxidant Concentration on Intrinsic Viscosity and Swelling Behavior of a Chemically Modified Persain Gum (PG) in Water Green and Environmentally Sustainable Biopolymers
A-10-2346-1 Preparation and charecterisation of PLA/PBAT/pMDI blends suitable for food packaging Green and Environmentally Sustainable Biopolymers
A-10-2641-1 Green starch composite films reinforced bysecond-generation bioethanol production byproduct Green and Environmentally Sustainable Biopolymers
A-10-2058-1 Stabilizing Organized Surface Structures in Casting Solutions of Ionic Block Copolymer Membranes Nano-structured Polymers and Smart Systems
A-10-2265-1 Preparation of thermochromic polymer based on rhodamine B for development of anticounterfeiting inks Nano-structured Polymers and Smart Systems
A-10-2322-2 Post-Polymerization Modification of Amide Functionalized Copolymer Nanaoparticles with Oxazolidine for Advanced Anticounterfeitng and Information Encryption Nano-structured Polymers and Smart Systems
A-10-2379-1 Preparation of light-responsive nanofibrous polymers Nano-structured Polymers and Smart Systems
A-10-2335-2 The Effect of Acrylic Based Ionomer Gel Microstructure and Electrolyte  Type on the Volume Conductivity of Assembled Battery Separator Nano-structured Polymers and Smart Systems
A-10-2335-3 Mono-size Polyisocynate nanoparticles as the interfacial crosslinker of WPU/Acrylic core-shell latexes to adhesively bond laminates Nano-structured Polymers and Smart Systems
A-10-2483-1 Fluorescent Polymer Nanoparticles as High-Security Anti-counterfeiting Ink Nano-structured Polymers and Smart Systems
A-10-2394-1 Visualization of Latent Fingerprints by Powder Dusting of Spiropyran Copolymer Nanoparticles Nano-structured Polymers and Smart Systems
A-10-2065-1 An Environmentally Friendly Adsorbent Aerogel with Outstanding Mechanical Performance Polymer Blends, Composites and Nano-composites
A-10-2125-1 Preparation and characterization of hybrid organic-inorganic nanoparticle/PVDF blends Polymer Blends, Composites and Nano-composites
A-10-2231-1 Preparation and properties of co-continuous PC/PET/MWCNT/GNP engineering polymer blend nanocomposites Polymer Blends, Composites and Nano-composites
A-10-2232-1 Investigating the effect of extruder die temperature on rheology-morphology relationship in polypropylene/polyethylene terephthalate blend Polymer Blends, Composites and Nano-composites
A-10-2024-1 Significant enhancement of Thermal conductivity in epoxy filled ceramic fillers Polymer Blends, Composites and Nano-composites
A-10-2291-1 Effect of Initial Silica Content on the Phase Composition, Morphology, and Thermal Oxidation Kinetic of Novolac-based Carbon Aerogel Composites Polymer Blends, Composites and Nano-composites
A-10-2299-1 Preparation of paraffin/CNT/PP aerogel composite as a new phase change material Polymer Blends, Composites and Nano-composites
A-10-2399-1 Mechanical and rheological properties of Poly Lactic Acid (PLA) and Poly  Butylene Succinate (PBS) nanocomposites incorporating cellulose  nanocrystals Polymer Blends, Composites and Nano-composites
A-10-2159-3 Calendering Process of Bio-based Kenaf/Low Density Polyethylene Composites Sheets Polymer Blends, Composites and Nano-composites
A-10-2642-1 Conduction mechanism and dielectric properties of PP/EVA/MWCNTs nanocomposites in the presence of PP-g-MA comatiblizer Polymer Blends, Composites and Nano-composites
A-10-2565-1 Effect of Modified Carbon Fiber on Shape Stability and Leakage Reduction of Phase Change Systems Based on Polyethyene Glycol Polymer Blends, Composites and Nano-composites
A-10-2637-1 Morphological and rheological investigation of PP/PC/SBS/Clay nanocomposites Polymer Blends, Composites and Nano-composites
A-10-2594-1 Polystyrene/Poly(lactic acid) Janus particles prepared by emulsion solvent evaporation method Polymer Blends, Composites and Nano-composites
A-10-2730-1 The Effect of Wood Content and layer thickness on Tensile Properties of Wood Flour/ PLA Composites Fabricated by FDM Polymer Blends, Composites and Nano-composites
A-10-2093-1 Antibacterial Nanobiocomposite Hydrogels Based on Polyphenolic Nanosheets Decorated with Ionic Liquid for Tissue Engineering Polymer in Biomedical and Tissue Engineering
A-10-2128-1 Poly(ionic liquid) based Antibacterial Hydrogels for Wound Healing Polymer in Biomedical and Tissue Engineering
A-10-2047-2 Investigating the influence of UHMWPE fibers as a toughening agent for PMMA in denture base Polymer in Biomedical and Tissue Engineering
A-10-2087-1 Fabrication of PLGA microcarriers with oxygen release capability for bone tissue engineering Polymer in Biomedical and Tissue Engineering
A-10-2204-2 Investigation of polymerization temperature profile of  PMMA bone cement/nano-silica composite by infrared thermography Polymer in Biomedical and Tissue Engineering
A-10-2071-1 The effect of hydroxypropyl cellulose presence on the morphology and physical properties of polyvinyl alcohol nanofibers Polymer in Biomedical and Tissue Engineering
A-10-2569-1 Effect of modified graphene oxide nano-plate on mechanical properties of GelMA nanocomposite in tissue engineering Polymer in Biomedical and Tissue Engineering
A-10-2359-2 Fabrication of gelatin/ poly (vinyl alcohol)/ carboxymethyl cellulose composite nanofibrous sponge for hemostatic application Polymer in Biomedical and Tissue Engineering
A-10-2309-1 Preparation of poly(L-lactic acid)/gelatin co-electrospun nanofibers as potential products for biomedical applications Polymer in Biomedical and Tissue Engineering
A-10-2490-2 Investigation of the effect of chitosan on polyurethane bioadhesive based on castor oil Polymer in Biomedical and Tissue Engineering
A-10-2292-1 Granular Hydrogels Composed of Modified Jammed Microgels For 3D Printing Applications Polymer in Biomedical and Tissue Engineering
A-10-2516-1 Fabrication of nanofibrous Piezoactive bioscaffold based on PVDF-GO/PLLA nanocomposite by hybrid electrospinning method Polymer in Biomedical and Tissue Engineering
A-10-2558-1 Introducing a nanocomposite transdermal patch: Adhesion and ketoprofen release Polymer in Biomedical and Tissue Engineering
A-10-2464-2 Mimicking Mechanical Behavior of Human Tissue with 3D Printable Elastomeric Hydrogel Polymer in Biomedical and Tissue Engineering
A-10-2573-1 Click for bioprinting: Development of autonomous curable bioinks based on Diels-Alder click chemistry Polymer in Biomedical and Tissue Engineering
A-10-2421-1 Three Dimensionally Culture of Sheep Preantral Follicles in a Thiolated Hyaluronic Acid Hydrogel Polymer in Biomedical and Tissue Engineering
A-10-2102-1 Fabrication and characterization of 3D bio-printed electroconductive hydrogel scaffold based on Alginate and its application in cardiac tissue engineering Polymer in Biomedical and Tissue Engineering
A-10-2400-1 A Promising Success in the Full Regeneration of Critical-Size Bone Defects Polymer in Biomedical and Tissue Engineering
A-10-2606-1 Rheological study of alginate-gelatin hydrogel for tissue engineering bioprinting Polymer in Biomedical and Tissue Engineering
A-10-2273-2 The effect of the presence of Chondroitin sulfate on porosity and mechanical properties of enzymatically cross linked silk fibroin/ chondroitin sulfate hydrogel Polymer in Biomedical and Tissue Engineering
A-10-2639-1 Interpenetrated network hydrogel based on GelMA/ alginate and nano SiO2 Polymer in Biomedical and Tissue Engineering
A-10-2132-1 Control of hydrogen response for Polypropylene Obtained by Ziegler-Natta Catalyst: Effect of External Donor Polymer Synthesis and Polymerization
A-10-2220-1 Supercooling suppression of microencapsulated phase change materials (mPCMs) with melamine formaldehyde shell by adding nucleating agent into the core material prior to encapsulation Polymer Synthesis and Polymerization
A-10-2105-1 Enhanced CO2 capture on nitrogen-doped porous carbon materials derived from phenolic resins based on deep eutectic solvent precursor Polymer Synthesis and Polymerization
A-10-2254-1 Preparation and characterization of photochromic polymer nanoparticles for the development of highly efficient anticounterfeiting nanoinks Polymer Synthesis and Polymerization
A-10-2074-1 Synthesis of nanocellulose functionalized with pH-sensitive polymer to remove methylene blue from wastewater Polymer Synthesis and Polymerization
A-10-2258-1 Preparation of core–shell acrylonitrile-styrene-acrylate impact modifier particles through seeded emulsion polymerization Polymer Synthesis and Polymerization
A-10-2286-2 Synthesis of Water-Soluble Sulfonated Polyaniline (SPANI) and Investigation of Its Effect on the Short-Circuit Current in the Perovskite Solar Cells Polymer Synthesis and Polymerization
A-10-2076-2 Surface Engineering of Reduced Graphene Oxide by Grafting Poly(butyl acrylate) chains for Use in Dielectric Polymer Nano-Composites Polymer Synthesis and Polymerization
A-10-2369-1 Preparation of Polystyrene Microparticles by on-chip UV-Polymerization through Microfluidic Channels Polymer Synthesis and Polymerization
A-10-2318-1 Experimental Investigation on Morphological Characteristics and Stability of Poly(vinyl chloride) Microspheres by Microsuspension Polymerization Polymer Synthesis and Polymerization
A-10-2407-1 Cellulose-based recyclable polymer electrolytes Polymer Synthesis and Polymerization
A-10-2403-2 Investigation of effective parameters on cloud point of poly(acrylamide-co-acrylonitrile) in aqueous solutions Polymer Synthesis and Polymerization
A-10-2566-2 Synthesising Iron OxideSilicaGelatin Nanoparticles Polymer Synthesis and Polymerization
A-10-2419-1 Polyurethane Rigid Foam Synthesis Using Response Surface Methodology(RSM); Morphological Study Polymer Synthesis and Polymerization
A-10-2398-1 Synthesis and characterization of poly(aniline-co-carbazole)Fe3O4 magnetic nanocomposite for X-band microwave shielding application Polymer Synthesis and Polymerization
A-10-2492-3 Synthesis and characterization of 2D layered Cu-pPDA coordination polymer Polymer Synthesis and Polymerization
A-10-2530-1 Synthesis of imidazolium-based polymeric ionic liquid as supercapacitor active material Polymer Synthesis and Polymerization
A-10-2538-1 Stimuli-Responsive PAMAM Dendritic Macromolecules for Optical Detection of Food Spoilage Polymer Synthesis and Polymerization
A-10-2562-1 Water absorption and thermal stability of waterborne polyurethaneacrylate/nanoclay films Polymer Synthesis and Polymerization
A-10-2592-1 Synthesis of novel triazole-based poly vinyl imidazolium Ionic liquid for demulsification of water in crude oil emulsions Polymer Synthesis and Polymerization
A-10-2593-1 Kinetic study of Butyl Acrylate Solution Polymerization at High Temperature Polymer Synthesis and Polymerization
A-10-2508-3 Titanium-Silasequioxane Coordination Compound as a Heterogeneous, Thermally Stable Catalyst: Synthesis and Characterization Polymer Synthesis and Polymerization
A-10-2572-1 Ethylene-Propylene copolymerization using Et(Ind)2ZrCl2 metallocene catalyst: Synthesis and Microstructure Analysis Polymer Synthesis and Polymerization
A-10-2039-2 Monitoring the effect of initiator, stabilizer, and water/alcohol medium on the conversion of synthesized polystyrene by dispersion polymerization method by Design Expert software Polymer Synthesis and Polymerization
A-10-2084-1 Electrospinning of Polyhydroxybutyrate/Lignin/Cellulose-nanofibers Bio-nanocomposite Scaffold for Bone Tissue Engineering Application Polymeric Materials for Medical Care in the COVID-19 Pandemic
A-10-2241-1 The potential of PIM-1/nano silver air separation membranes application in the production  of the face masks in the COVID-19 pandemic Polymeric Materials for Medical Care in the COVID-19 Pandemic
A-10-2066-4 Rheological behavior of poly(lactic acid)/ silicon rubber/ Silicon Modified Graphene Oxide Rheology and Polymer Processing
A-10-2257-2 Pitch Mesophase Common Rheological Behaviors Rheology and Polymer Processing
A-10-2030-1 The solid state rheological investigation of core-shell impact modifier nanoparticles efficacy: 3-D networking Rheology and Polymer Processing
A-10-2352-1 The rheological characterization of different concentrations of bacteria in the polymer solution Rheology and Polymer Processing
A-10-2481-1 Modification of Polypropylene-graft-Maleic Anhydride with Epoxy by Reactive Extrusion for Preparation of High-Melt-Strength Polypropylene Rheology and Polymer Processing
A-10-2501-1 Studying Rheology of the FENE-P Chains Using a Micro-Macro Approach Rheology and Polymer Processing
A-10-2564-1 Influence of molecular weight, molecular weight distribution, random  and impact co-polymerization on the rheological behavior of polypropylene Rheology and Polymer Processing
A-10-2539-2 Chemorheological Characterization of HTPB Based Polyurethane Formulations Containing Different Chain Extender Contents Rheology and Polymer Processing
A-10-2263-1 Simulation of Rubber Hose Curing Simulation and Modeling of Polymeric System
A-10-2219-1 The Abnormal Analysis of Number Average Molecular Weight of Sulfonated Melamine Formaldehyde (SMF) Simulation and Modeling of Polymeric System
A-10-2138-1 New Protocol For Modeling of Thermal Degradation Kinetics of Epoxy Nanocomposites Simulation and Modeling of Polymeric System
A-10-2257-1 Modeling and Temperature Control of Isocyanate-Water Side Reactions Simulation and Modeling of Polymeric System
A-10-2453-1 Multiscale Modeling Approach to Predict the Mechanical Behavior of elastomer nanocomposites Simulation and Modeling of Polymeric System
A-10-2336-1 The Effect of Bulk Acoustic Waves on Glass Bead Dispersion Inside The 3D Prinint Resin Materials Simulation and Modeling of Polymeric System
A-10-2525-1 A novel approach for synthesis of zwitterionic polyurethane coatings through molecular dynamics simulation study Simulation and Modeling of Polymeric System
A-10-2510-2 Space State Temperature Control of poly(butylene succinate) esterification reactions Simulation and Modeling of Polymeric System
A-10-2659-1 Numerical Study on The Effect of The  viscosity on The Pinch-Off Behavior of The Droplet in Drop Formation Process Simulation and Modeling of Polymeric System
A-10-2662-1 The Origin of Charge Transport Synergism in the Hybrid of Geometrically Anisotropic and Conductive Nanoparticles: A Monte Carlo Simulation Study Simulation and Modeling of Polymeric System
A-10-2418-2 Oxygen permeation rate through PBAT: a molecular dynamics simulation Simulation and Modeling of Polymeric System

 
Topic URL in the 15th International Seminar on Polymer Science and Technology (ISPST2022) website:
http://ispst.ir/find.php?item=1.124.73.en
Back to content primary page